Jump to content
SAU Community

Recommended Posts

I will like to know how PCM valve operates for gtr33....

I toook mine off, and boost went from 1 bar all the way to more than 1.4 bar(max) needle even went more than 1.4bar....

Sounds great!!!! but what are the side effects???

how to get that boost with having ocm modified and how???

Link to comment
https://www.sau.com.au/forums/topic/312609-pcm-valve/
Share on other sites

Stock turbos can't handle much more than 13/14psi, which is less than 1 bar.

Am I the only one who keeps reading this thread title as Porn valve?

thanks mate....the car stalls a bit once turbo go above 1 bar....so i guess its stock than.....

i better fix the pcm back on...........

Link to comment
https://www.sau.com.au/forums/topic/312609-pcm-valve/#findComment-5146270
Share on other sites

thanks mate....the car stalls a bit once turbo go above 1 bar....so i guess its stock than.....

i better fix the pcm back on...........

Good son of rajab! Your poor engine... :blink:

I recommend you also throw out your tool kit so your don't ever work on the car ever again. Reminds me of a guy I know that tried to fix his porsche alternator with a hammer...

Link to comment
https://www.sau.com.au/forums/topic/312609-pcm-valve/#findComment-5146387
Share on other sites

do you mean pvc valve? what im thinking off is the valve thats on you plenum that pipes to the top of your rocket covers then to your intake?

if so, leave it in if you have a std engine there is no need or any gains in removing.

if running a mild/wild engine i recomend removing anything running 1.4 bar + as this valve can jam up and you will get boost jamed into your rocket covers and oil squrting out every posible place in about 20 sec flat lol work this one out for experience had my catch can over flow in a 2 min drive and turned out to be the pvc valve broken.

Link to comment
https://www.sau.com.au/forums/topic/312609-pcm-valve/#findComment-5146455
Share on other sites

it is stock i think.....does it make any difference???
Stock turbos can't handle much more than 13/14psi, which is less than 1 bar.

Am I the only one who keeps reading this thread title as Porn valve?

Difference between you blowing up your motor and not.

^^ What Birds and Ash have said.

GTR's came stock with twin Garrett T28 turbo's, which have ceramic internals.

As what Birds has said, you run anything more than 1 Bar, it won't be long before you get what Ash has said.

Having said what Ash said, your turbo's will be destroyed.

Link to comment
https://www.sau.com.au/forums/topic/312609-pcm-valve/#findComment-5147169
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...