Jump to content
SAU Community

Recommended Posts

The reason i ask is when i did a rb25det and now a rb26dett conversion into my C35 Laurel is does not cut the ac at high rpm/load etc.

I am thinking the ecu for the particular engine cuts the signal to the ac compressor when it sees fit but apparently there is some other circuit that it needs to pass through???

Maybe only skylines has this circuit in the ac system????

On the ecu pin out there is the ac switch signal (pin 46) and ac relay/ ac cut signal (pin 9) that goes to a triple pressure switch thingy....

Can anyone tell me how i can get this feature to work?!?!

Link to comment
https://www.sau.com.au/forums/topic/312680-ac-cut-out/#findComment-5149030
Share on other sites

  • 2 weeks later...
Do skylines switch off the ac compressor at high rpm??? Particularly the Rb25det equipped ones.

If so at what rpm does is switch off and then come back on???

Thanks

ooops...look like sau is givin some trouble :)

yes on the R34 GTT it cuts the compressor out under heavy engine loads, (ie flooring it). don't know the exact cut off but it tells you in the service guide the exact numbers

Link to comment
https://www.sau.com.au/forums/topic/312680-ac-cut-out/#findComment-5181893
Share on other sites

  • 6 months later...

I think we are on the same track. When i rev fast like push the pedal to the max it could go to 6k rpm on the first gear. Then the power cut off and it felt like as if i pushed the brake so hard. O_o

If i put on nutral and contantly rev harder it would go up to 5K or 5K+ a bit then the power cut off again and nothing i could do but to just watch it dropped down to about 3.5k rpm then i could rev again.

This is really weird. Can anyone help me please? :huh:

Link to comment
https://www.sau.com.au/forums/topic/312680-ac-cut-out/#findComment-5523167
Share on other sites

I think we are on the same track. When i rev fast like push the pedal to the max it could go to 6k rpm on the first gear. Then the power cut off and it felt like as if i pushed the brake so hard. O_o

If i put on nutral and contantly rev harder it would go up to 5K or 5K+ a bit then the power cut off again and nothing i could do but to just watch it dropped down to about 3.5k rpm then i could rev again.

This is really weird. Can anyone help me please? :huh:

Totally different track Charlie.

Your problem can be identified using "Search"

re: coil packs, plugs, ignitor, looms, fuel pump and so on.

Link to comment
https://www.sau.com.au/forums/topic/312680-ac-cut-out/#findComment-5523593
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...