Jump to content
SAU Community

R35 Mailorder Tune Results

LSX-438

By LSX-438,
in R35 GTR

 Share

Recommended Posts

LSX-438 Mentor

LSX-438

Posted
Posted

Last year i was unable to run a tune in the supersprint championships (as i was in class 2D and awd/turbo cars must run stocker calibration) however this year i have been running a tune from Martin at Willall with great results thus far. I had tried another tune from elsewhere previously however it was earlier on in the R35 development cycle (before the latest boost control logic) and initially i was lapping SLOWER when we tried it - simply because the power would spike quickly resulting in wheelspin city! Fun on the street (it was a bit rollercaster like) but not exactly optimal for lap times.

Queue the new Cobb boost control logic; the tune was emailed to me from Martin and uploaded via the Cobb in a few minutes. The result is a more linear application of boost, and substantially less wheelspin / easier to manage on the circuit. For those interested here is the dyno results i had done INDEPENDENTLY in Sydney yesterday. We ran it up in 4th (339awkw) *AND* 3rd gears (353awkw) to satisfy curiosity. Print out from 4th gear run is below. I am pretty happy with the tune, considering it's a mailorder job with no trimming, the boost and AFR's look good to me (although i am no expert obviously). Thanks Martin. The more valuable apspect to this new boost logic is the on-track application of power. We'll be heading out to Wakefield Park next week to improve on our lap records, stay tuned!

dyno.jpg

Link to comment
https://www.sau.com.au/forums/topic/313469-r35-mailorder-tune-results/
Share on other sites
LSX-438 Mentor

LSX-438

Posted
  • Author
Posted

i didnt bother with the off-the-shelf cobb maps.

Whilst i say the tune has not been trimmed, Martin has sent me a couple of enhanced updates as he has found a few issues after his own on-track experience, that sort of support is gold. I have to say the car has performed flawlessly thus far & like a stocker in terms of street manners.

  • 3 weeks later...
09GTR Collaborator

09GTR

Posted
Posted

Jim at CRD has just finished the latest tune on my car, now running a consistent 395 atw kw, holding 19 pounds boost all the way (almost) to red line. Cleaned all the sensors, new plugs, - its like getting a new car again. Its amazing, but the car drives so differently, the power delivery is instant and savage the whole way to red line. I'm, going to WSID next wednesday night to try and beat my last time (10.89). Based on the on street improvement, I'm pretty confident I can beat it if I get a good launch.

Whats even better news is that CRD reckon this tune is good for the track. I can lower the boost levels by 2 -3 psi and dial out wheelspin for track use - should still be good for 380kw plus atw on track.

On road, at 19psi I'm getting some sensational wheelspin in second gear, its like driving a V8!

Who said these things didnt have a soul?

70RTY Enthusiast

70RTY

Posted
Posted

I received my COBB AccessPort with mail order Willall tune a few days ago. After a simple 20 minute installation process, I was on my way. The car feels stupidly fast on the street now! It seems to come on boost harder now and the acceleration is laugh out loud fun.

As I have only driven on the street at this point, it is hard to give too much valuable insight into the cars performance after the COBB tune. I can say it feels significantly faster and seems to be terrific bang for buck value. I am booked in for a track day this coming weekend so I will report back after that. If I get the opportunity, I will run the car on a dyno at some point.

Also, I think it is probably just my imagination, but the transmission seems to shift a bit smoother. I can't say this is definitely the case.

LSX-438 Mentor

LSX-438

Posted
  • Author
Posted
you guys are damn brave running a generic tune at the track before checking it is safe on a dyno first! $30k gamble isn't it?

There's always an element of risk with any tune, i guess more with a non-custom job yep. However a number of us have had a good experience with the willall tune, on relatively stock cars, seems to be backed up by track and independant dyno results which confirm the tune is good. So it's not an entirely uninformed decision.

Duncan Grand Master

Duncan

Posted
Posted

understood....but factory tunes are designed to be safe with the variation of actual cars and conditions they are run under. any tune which makes more power as a result has less margin for safety. maybe a little less, maybe a lot less. either way I bet it does not come with an egnine rebuild guarantee.

I've got no issues with a mail order tune, and I have run one in my race car - but I would always spend $50 to check it on the dyno before hitting the track.

LSX-438 Mentor

LSX-438

Posted
  • Author
Posted
understood....but factory tunes are designed to be safe with the variation of actual cars and conditions they are run under. any tune which makes more power as a result has less margin for safety. maybe a little less, maybe a lot less. either way I bet it does not come with an egnine rebuild guarantee.

I've got no issues with a mail order tune, and I have run one in my race car - but I would always spend $50 to check it on the dyno before hitting the track.

good advice, very true.

Dominic Rising Star

Dominic

Posted
Posted

I finally tested the car at a Dyno today, to ensure the speed limiter was off and we went up to 220km/hr so assume its OK.

Whilst doing this we measured the power and A/F ratio and were pleasantly surprised.

2008 Nissan GTR running stock 20in wheels and run flat tyres @ 32 psi

mods= centre pipe changed only

Running 17 psi on 98 Octane with Willal tune

366.9 kwatts ATW 690 Newton/Metres Torque.

Sub 12-1 A/F ratio

Video

http://www.flickr.com/photo_embed.gne?id=4...157623014415960

Graph

http://www.flickr.com/photos/90747317@N00/...57623014415960/

Dom

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...