Jump to content
SAU Community

Recommended Posts

PJ....that R34 with the stock bottom end and stock cams....what was the power at the hubs? Im presuming the dyno run is showing corrected power at the fly? Im in the UK and I want to run a single on my Forged RB26 in my R32 GTR (Stock head and cams). Im going with a T3/T4 topmount manifold and was looking at the 6262.....I want 500BHP at the hubs at no more than 25PSI.......is this gonna be do-able with the 6262? Im looking for spool compariable to uprated twins but with the ability to crack 500BHp at the wheels. What do you reccomend guys??? Exact turbo specs please?

Oh.......why all the reference to 4 Cylinder Nissan engines and even worse Toyota engines??? Surely you guys must be all running 6 cylinder RB's in the main???? Just find it a little strange as in the UK where im from there isnt a lot of skyline interest in 4 cylinder mills....its all RB26/26/30 etc.......

Cheers

Andy

Is it a T3 or T4 manifold, you cant have both.

Is it a T3 or T4 manifold, you cant have both.

Now you can!

They are making manifolds with flange plates which have the bore of a T3 and the footprint of a T4 with the bolt holes for both.

Sounds OK. Flexible :)

Your in the UK arent you Andy B?

In OZ we measure actual energy at the output point. Thus if we are on a Hub dyno we are measuring energy at the hubs and if we are on a Chassis dyno we are measuring energy at the wheels.

Obviously the hub dynos read a little higher as the wheels sap a little energy away on the chassis dyno.

We normally want to know what sort of power we are putting to the road, it is a good indicator of the cars performance. Take our fabled Commonwhore V8's for example, some of the older LS1 models rolled out of the factory with something along the lines of 280kw (flywheel rated), yet you chuck them on a dyno and should be pleased if you have 200rwkw.

Yanks are also guilty of calculating flywheel HP through a chassis dyno or similar, sort of misleading IMHO. I would rather know what sort of energy I put to the road than what sort of energy I could theoretically put to the road lol

Guys,

Estimating Flywheel power is comon here in the UK and yes, I agree its a load of BS. Power at the wheels is where its at. Im surprised the PT 6262 mande nearly 500BHP ATW..........................

i saw that sound performance in the US were testing the 6266 on a stock motor/w kelford cams 3.0 ltr 2JZ with a cast manifold it made 748 whp and 730 tq @ 29 psi on E64 and say they can squeeze 800whp out of it with more boost. He did one pull on pump gas also and made about 530 whp @ under 20 psi

6266.... What's the specs on that? It's bigger than the 6262 I presume??

its a newer wheel from precision thats for the 67 and 62 turbos , spools for example 6766 spooled better and picked up 35 hp over the 6765

some more info about it and price on the Sound Performance site 899 US dollars for the normal journal bearing one

spracingonline.com/store/Precision_62mm_CEA_Billet_Turbo_6266

here is the dyno sheet from the stock motor 3.0 ltr 2JZ using a 6266

MarkCook11024x768.jpg

Here is a comparison between a 6765 and a 6766

299736_2240601587792_1630643829_2220817_1240013805_n.jpg

Edited by R32GTR/Iceland

That looks great but has anyone put one of these on a 26?? I see loads of high boost RB30 examples but I wanna see a 26 ..... Not running on E85.... Just pump gas . Can anyone post up such results? A good turbo on a 26 with std cams and pump fuel should be able to make 500whp well under 2 bar......spooling at less than 3500 and making full boost by 4500........ Anyone???

some more info on a 6266 on a Supra / 2JZ

amazing results !

Craig's Supra:

Precision 6266 CEA Billet .81 A/R

3.4L Stroker with 9.5:1 CR

Kelford 274 cams

Built but UNported Head

Hypertune Intake Manifold

Approx 683whp/590wtq and crossing 300ft-lb @ 2900rpm on SP's mustang dyno. @ 18.3 psi

770whp/700wtq @ 24 psi

843 whp wtq @ 29 psi

300wtq @ 3000rpm

Peak Torque @ 4800rpm

Peak Power @ 5300rpm

Steady Power through 7800rpm redline

959 RWHP and 941 TQ on a 6266 with nitrous !!! Boost hit 38 psi then fell to 29 where it actually makes peak hp. 125 shot of nitrous.

bush_843whp844wtq29psi.jpg

6266 with nitrous

CraigBush5.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...