Jump to content
SAU Community

Recommended Posts

Honestly mate don't know if the full race is better or not. Would need to do some back to back testing which would be a real pain in the ass as you would need to plumb up 2 different sets of gates.

If I had my time again I would probably just bought a 6 boost one for reasons such as

1. Cheaper

2. Quicker to obtain (each fullrace manifold is made On order)

3. If it cracked or failed in anyway would be easier for warranty

4. The full race is a bit of a nightmare plumbing wise.

Though I do like how the manifold looks and how it makes the turbo sit towards the front of the car.

I also had to cut a bit of the re enforcement out of my bonnet to fit the Massive frame of the BW

yeah there'd want to be some noticeable up side to warrant the above trade-offs..

How long did it take from payment till it turned up on your doorstep Joey?

It was a while ago but from what I can recall it was ages.. Like as in months.

It didn't bother me at the time as the car wasn't ready anyway.

Also if you order from the US you will pay tax.. Not like the dodgy japs who put Down 700 bucks for a nismo pump, injectors and a twin plate copper mix :D

I do admitt the manifold is a work of art though and I don't regret buying it

It was a while ago but from what I can recall it was ages.. Like as in months.

It didn't bother me at the time as the car wasn't ready anyway.

Also if you order from the US you will pay tax.. Not like the dodgy japs who put Down 700 bucks for a nismo pump, injectors and a twin plate copper mix :D

I do admitt the manifold is a work of art though and I don't regret buying it

I would not regret buying it either, it is a very well designed manifold, better design than the 6boost.

Edited by bigmikespec

Any email back? The one on the 34 did look a little bigger but by how much I couldn't say. I'd love to know!

What do you think you will order for your car John? 6466?

Email - yes, Answer - no. But will let you know as soon as I do.

I did however email a mob over in the US and they put the 6466 in the middle of the EFR 8374 and 9180 in terms of response and power. This makes it a good choice I'd rekon.

I'm still committed to more time with my twin EFR's, however they're only 1 failure away from being replaced for good.

Email - yes, Answer - no. But will let you know as soon as I do.

I did however email a mob over in the US and they put the 6466 in the middle of the EFR 8374 and 9180 in terms of response and power. This makes it a good choice I'd rekon.

I'm still committed to more time with my twin EFR's, however they're only 1 failure away from being replaced for good.

Interesting.

Wasn't the berry 34 running an EFR last year? If so, I wonder what the reason for the swap was.

Whilst it's not my place to answer on Mark's behalf, I can tell you from experience that anyone dealing with BW in the early "EFR Launch" days didn't really get looked after that well by them. this experience makes the decision to change fairly easy, dollar permitted ofcourse!

I would not regret buying it either, it is a very well designed manifold, better design than the 6boost.

Can you elaborate how they are better in design?.. I haven't really checked out the 6 boost yet

Can you elaborate how they are better in design?.. I haven't really checked out the 6 boost yet

The runner lengths are designed correctly (pulse tuned), 6boost is not. I believe it to be important in turbo manifold design.

suffered undisclosed secret issues that could neither be confirmed nor denied while discussions with BW was ongoing? :ninja:

lol yeah at the time... Plenty knew what had happened, yet the marketing machine was trying to avoid admitting it.

what have you done Jase?

lol

lol its not definite yet, but I have the invoice for a 5558 .64

was going to pay it this week but funding fell short :( will need to wait a few more weeks maybe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...