Jump to content
SAU Community

Recommended Posts

Why have I been thinking you both had the .82 v band rear?

I think it's partly because of the numbers you put out I must of just assumed...

So what is the go with a .63 5558 compared to a 3076r in terms of compressor and turbine wheels then? Because it seems to put out very similar numbers to a .82 3076r

Well 280-290kw with full boost at 4000rpm isn't too shabby for a JB turbo, though no better than a Kando T67 in spool and a bit concerning if IATs are getting unacceptable. Sounds to me like the Kando would be a better unit for this kind of setup, though the ball bearing unit would no doubt be quite a bit nicer.

True, I don't think anyone is punting a T67 on the stock manifold. The comp housing is too large from what I know.

I have to say though the result from Kurtis is really nice. Spool is mega and so is power, but it needs to be said hes on a high mount and E85. The T67 is probably better off at the level Ron is at (with a cheap highmount) but the 5558 would be better in terms of contingency.

Not to rub anything in to anyone, but we all did say 'buy a hypergear' about a million times lol.

What do you mean by contigency, JD?

Contingency planning in case Ron gets bored of his current power I mean. The 5558 seems better matched to the highmount and E85 slurping setup that he would probably move to from there, based on the result from Kurtis which seemed to be very responsive whilst making its 360kw.

Kurtis car has a very linear power curve on the street, when he took me for a run in it, even on high boost it would hardly brake traction.

It came on very low in the rev range, and pulled smoothly all the way to redline. Not like a laggy single setup or twin setup which has the nothing nothing nothing and than bam it ramps on hard wheel spins all over the road, than bogs down when u kick it up the next gear.

Long story dude...had a friend of a friend mini tub it..car went missing and shit stolen and paint f**ked(it was a new paintjob already)

I had all the dodgyness fixed/ retubbed/ 4link/cage fitted and my mate that painted it the first time...has fixed and repainted it for FREE...(instead of another 5G), so i can't complain..

Not like i havn't seen it..lol, my mate lives on a farm and has his workshop and booth there..haha

..Turbos a Gt45 frame , its a discontinued turbo..you havn't been able to get them for 3-4yrs..hence me taking 2 yrs to find one in the U.S. checking google every week..was a headf**k to buy and get here

Edited by jet_r31

Kurtis car has a very linear power curve on the street, when he took me for a run in it, even on high boost it would hardly brake traction.

It came on very low in the rev range, and pulled smoothly all the way to redline. Not like a laggy single setup or twin setup which has the nothing nothing nothing and than bam it ramps on hard wheel spins all over the road, than bogs down when u kick it up the next gear.

Boost leak has been fixed since then Deano, the bov he installed was poo. Was leaking at 1 psi with the smoke test.

But yes its a nice linear power curve not a lag monster

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...