Jump to content
SAU Community

Recommended Posts

why am i not surprised! im hearing alot of bad stuff these days. Apart from their fan boys that is

They seem to get Nitto running pretty well but, struggled to get my tune right. But they are really good to get a long with as guys and hang out with. Tuning just wasnt to my liking. and yes they are a bit on the expensive side.

They seem to get Nitto running pretty well but, struggled to get my tune right. But they are really good to get a long with as guys and hang out with. Tuning just wasnt to my liking. and yes they are a bit on the expensive side.

im not a fan at all...but thats another story! ill give em a call and find out a 6466 .84 is?

lol all good. I gave them a buzz and they are ringing me back with a price.

I must admit their run of 9.6 @160mph seems slow considering the trap speed. JW Automotive work on an R32 that did around the 9.4 or 9.2 mark @ 149mph

  • Like 1

lol all good. I gave them a buzz and they are ringing me back with a price.

I must admit their run of 9.6 @160mph seems slow considering the trap speed. JW Automotive work on an R32 that did around the 9.4 or 9.2 mark @ 149mph

This. high trap speed for no speed. Should be low 9s easily, but then dont even get me started on these guys lol

they will more than likely run with the excuses of bad tyres and wheel spin again

or they were on run in tune of 938whp and 34psi of boost

Edited by Frosty

least they have run a 9 now.

Watching the runs though, there is too much engine for the chassis setup, its all over the shop, bobbing and weaving etc.

If they get that sorted instead of throwing more power at it it will be quick

its never going to be anything other than a dyno queen

Its a 9 second street car - that's definitely more than just a dyno queen, mid 9s is serious business even if it isn't as quick as it could be.

Its a 9 second street car - that's definitely more than just a dyno queen, mid 9s is serious business even if it isn't as quick as it could be.

Its far from a dyno queen, its gets used and abused :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...