Jump to content
SAU Community

Recommended Posts

why am i not surprised! im hearing alot of bad stuff these days. Apart from their fan boys that is

They seem to get Nitto running pretty well but, struggled to get my tune right. But they are really good to get a long with as guys and hang out with. Tuning just wasnt to my liking. and yes they are a bit on the expensive side.

They seem to get Nitto running pretty well but, struggled to get my tune right. But they are really good to get a long with as guys and hang out with. Tuning just wasnt to my liking. and yes they are a bit on the expensive side.

im not a fan at all...but thats another story! ill give em a call and find out a 6466 .84 is?

lol all good. I gave them a buzz and they are ringing me back with a price.

I must admit their run of 9.6 @160mph seems slow considering the trap speed. JW Automotive work on an R32 that did around the 9.4 or 9.2 mark @ 149mph

  • Like 1

lol all good. I gave them a buzz and they are ringing me back with a price.

I must admit their run of 9.6 @160mph seems slow considering the trap speed. JW Automotive work on an R32 that did around the 9.4 or 9.2 mark @ 149mph

This. high trap speed for no speed. Should be low 9s easily, but then dont even get me started on these guys lol

they will more than likely run with the excuses of bad tyres and wheel spin again

or they were on run in tune of 938whp and 34psi of boost

Edited by Frosty

least they have run a 9 now.

Watching the runs though, there is too much engine for the chassis setup, its all over the shop, bobbing and weaving etc.

If they get that sorted instead of throwing more power at it it will be quick

its never going to be anything other than a dyno queen

Its a 9 second street car - that's definitely more than just a dyno queen, mid 9s is serious business even if it isn't as quick as it could be.

Its a 9 second street car - that's definitely more than just a dyno queen, mid 9s is serious business even if it isn't as quick as it could be.

Its far from a dyno queen, its gets used and abused :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...