Jump to content
SAU Community

Recommended Posts

Buy your own :P

Even when I don't have a workshop I'll be installing one in my garage - it's worth every friggen penny.

well then you need to give me a garage to put the hoist your going to give me in ;)

  • 3 weeks later...
you could buy a decent single phase secondhand hoist at the auctions for around that.

Yes this is true, but I don't have the space to put in a hoist plus if you bought something like these then you could take them with you if you moved house a lot easier than a hoist.

I'd love a hoist but these are just another alternative. Oh and I'd rather buy them than make them, I dunno about you guys but i'm pretty sure I wouldn't get under any car being supported by something the I made myself lol

Yes this is true, but I don't have the space to put in a hoist plus if you bought something like these then you could take them with you if you moved house a lot easier than a hoist.

dig a pit in your garage?

that ramp thing doesn't look too safe/sturdy. also, if you're servicing brakes/wheels (which is 90% of the time my car goes up in my driveway instead of the workshop) that ramp is useless by its design.

"Sergeant Geoff Exton says the man's wife was in the car at the time of the accident. " that is absolutely terrible :D

I built some of those timber ramps (sleepers stacked on top of each other so they are like steps). It inspires much more confidence than any jack stand or spare tyre, especially when using the big breaker bar when the car sometimes sways side to side).

When dad built our house he thought ahead and built a pit in the garage, its pretty cool probably about 1.5m deep and you just stand in it and work on the car if needed, for oil changes and shit i don't bother though i just use some blocks of wood and do it on the street as my car cant get in the garage without scraping the front bar like a mofo.

I built some of those timber ramps (sleepers stacked on top of each other so they are like steps). It inspires much more confidence than any jack stand or spare tyre, especially when using the big breaker bar when the car sometimes sways side to side).

I built the same setup ..Its the way to go.

If your working under your car and you say to yourself ( shit i hope this dont fall) Get out.

It may only take a extra 30 seconds to make it safer.

A few things I have also learnt through various mishaps:

1) If in a rush the only place to never try and save time is getting the car off and back onto the ground. (crushed a power steering steel hose when jack slipped off crossmember. On boxing day, with shops closed for another 4 days).

2) Like Rchoo said, if you don't feel safe under the car then GTFO. Either that or you will probably make mistakes because you are so nervous.

3) Working with poor lighting, foggy head, hangover etc. You will make mistakes. Reschedule for another day.

4) Not having proper tools for the job. Make sure you have alternative transport to go to the shops :thumbsup:

I am guilty of all 4 and only managed to damage the car and make the entire job more costly and lengthier. No more shortcuts hereon I don't want to end up like the poor guy on the news...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...