Jump to content
SAU Community

Recommended Posts

Im going to be upgrading my ruined standard shocks + kingsprings (worse combination ever, aweful compared to standard)

Now I was considering getting the bilstein sydney kid recommends in his old group buy along with springs and the sway bars, or I was considering tein super street coilovers with 225lb (4kg) springs all around.

What setup is going to be better for a daily driven R32 skyline that will see the track every few months.

It has some serious power ~240rwkw so I need something that will squat a little and hookup but also that isn't sloppy like the standard springs nor so stiff the rear end just skates all over the road.

What setup do you guys think will handle better for my situation? I am looking at spending around the $1000 mark and not much more, both of these kits are around this price, the teins being about $900 and the bilstein combo roughly $1200.

Thanks in advance. = )

Teins are soooo silky for daily driving, a necessity for daily driving on crappy Sydney roads... I am yet to use them on any track, so have them on the softest setting and they are without exageration smoother on the road than my mates M3. Probably not the best for handling, but that might change with the harder settings.

They don't lower that much either if that is a priority.

I have also had HKS Pro Performer which are smooth, handle well, but unreliable, and GReddy Type S - awesome compromise!

Not sure how you going to get a bilstein setup for $1k

I got mine from ERD which is around the $1400 mark. Same setup as sydneykid's (but progressive kingsprings instead of linear whiteline springs)

http://erd.com.au/index.php?option=com_seb...=store&ck=2

Email ERD and ask them what would suit you.

Yeah bilstein setup is looking more like $1400 for the lot including camber kit, sway bars etc however after talking to a few people I am convinced it is the better setup.

I am going to go for a drive in a car with the sydneykid setup in it and compare it to my mates teins. It is a daily driver so I would prefer a soft setup with rollbars to counter the roll instead of stiff springs.

you are better off with the bilstein setup. Its designed for australian roads and its nice to drive on roads. Once you load up the springs by pushing the car, the springs stiffen up and you get some awesome handling.

In the end, shocks/springs only make up one bit of the suspension. Swaybars do a lot in terms of handling.

Teins are soooo silky for daily driving, a necessity for daily driving on crappy Sydney roads... I am yet to use them on any track, so have them on the softest setting and

Mine arnt......I would definatly go the bilsteins over the tiens any day.

the high speed damping in the Tiens is crap...way to crashy over cats eyes etc and they are too soft in the front spring rate for track work imo.

btw this is for a 33 gtst

I havent driven a 32 with them so I cant comment on that

I've got Gary's bilsteins in both my stagea and 32 gtr race car. Excellent mono shock damper, way better than anything else in the up to 1500 price range. Obviously there are better shocks again in the $4k+ range.

Hey boys. Went for a spin in an R32 with the sydney kid setup tonight, was a very very nice ride, surprised by how soft and cruisy it felt over bumps and on the street. The turn in and handling was very impressive as well, would have to say it definitely rivals the teins and with a better ride.

Now I have run into an issue, the part numbers for the bilstein shocks and the dampening rates are not to be found anywhere in the old group buy thread, and it appears sydney kid is no longer active on these forums. Would anyone here know these values or where I could find them out? Same goes for the spring rates etc, I can most likely get these fairly quickly but if I have anyone here to double check them with that would be tops.

Would very much appreciate it.

Cheers guys :laugh:

  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...