Jump to content
SAU Community

M35 Braided Brake Lines.

scotty nm35
 Share

Recommended Posts

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Im about to order a set of braided lines in from the UK, just wondering if the 350z has the same length lines front and rear. Anyone changed them over?

HEL have colored lines with stainless fittings for $120 delivered from UK, looks like the best deal by far.

Link to comment
https://www.sau.com.au/forums/topic/317310-m35-braided-brake-lines/
Share on other sites
chuckie Mentor

chuckie

Posted
Posted

G`day Guy`s ,

i have contacted Phil about GroupBuy & Stagea Line`s

As S2 are 835 mm long with the 3 block`s, so he`s going to see what they may cost ,

Not sure if MN35 are same so may be you will POST up few Photo`s & give us some Size`s ,

cheer`s Chuckie.

rb26stagea Grand Master

rb26stagea

Posted
Posted

assuming they are the same; I may have made an error and bought non-brembo braided lines for my V35.... If this is the case, I'll pm you: they cost me less than the advertised price you stated...

chuckie Mentor

chuckie

Posted
Posted

ok i have the Photo`s of S2 stock line`s they are about 830mm long with block conector`s & hard line.i know the Block`s are a fixing block so whether we really need them ?,iam not sure they are really needed as long as we have something to tie them with to keep out of harm`s way,ok so may be SOMEONE with MN35 will give me some feed back so we can LOOK AT the GROUP BUY ON BRAKE LINE`S ,

Cheer`s Chuckie

post-36964-1271832905_thumb.jpgpost-36964-1271833111_thumb.jpgpost-36964-1271833485_thumb.jpg post-36964-1271834829_thumb.jpg

post-36964-1271833035_thumb.jpg

post-36964-1271833296_thumb.jpg

post-36964-1271833362_thumb.jpg

chuckie Mentor

chuckie

Posted
Posted
They are definitely different Chuckie.

I will get Maltech to make a set up for me, then hopefully anyone else will be able to order a set through them.

Hi Scott i sent PM to Phil about them with some Photo`s he will look when the kit`s come,

& will let us know what to go is ,

can you take some Photo`s & post them up with lenght`s so we have some idea on what were looking for ,

Cheer`s Chuckie.

  • 1 year later...
bigkevracer Grand Master

bigkevracer

Posted
Posted

Did you guys end up getting braided lines?

I thought I read something about Scotty and Ironpaw getting G35 Stoptech lines and making them fit, but a bit of searching hasn't found anything. Maybe I was imagining it?

Is it even worth worrying about for a road car? I'm about to get some stuff from the states and they have reasonably cheap G35 lines, wasn't sure if I should do it when I did rotors and pads. Maltech et al seem to think the life of a rubber line is 6 years, so mine will be well and truly past that...

scotty nm35 Grand Master

scotty nm35

Posted
  • Author
Posted

I had Maltech quote a set for me, it came to $700. I decided to go the G35 lines. I havent fitted them yet, should be this week when the Brembos go on.

Ironpaw's lines went on fine but they dont just bolt up like the stock ones...

Daleo Grand Master

Daleo

Posted
Posted (edited)

forgetting the 4wd, would 350Z lines fit a rwd M35?

I'm sure you'd be ok; the 2WD front end is the same as a V35/Z33 front end.

I've sold a number of V35/Z33 front bars to go on 2WD M35's Perfect fit ; no issues.

Edited by Daleo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      Ha ha ha, that's fair mate! We have the crackhead dogs now. Mainly because the missus wants the crazy dogs while she still has the energy and capacity to be able to keep up with them! Ha ha our current two are both Working GSD, there brothers and sisters (from the same litters) are in Police, Corrective Services, and I believe one did end up in defence force too. They're wild and fun, yet right now, both curled up asleep on the lounge room floor while we watch some TV. Mal is very likely the next dog (unless I get my couch potato guardian dog 😛 )   What are your Kitties names? Are you planning some house work, like those high kitty shelves, built in scratching post, and some cat passages from one room to another room?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Maine Coone, did look at but to big and fluffy As for performance dogs, we had Mals at work, performance dogs are fun to watch, but, way to much work for this old rooster
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      Yep, it was only an option on the Q50 Hybrid.  Same in Japan as far as I know. And doesn't use a centre diff like the Suby's do, so not the same as the WRX.  But it also isn't a reactive AWD like other Nissan AWD vehicles are, eg. Murano/Xtrail/etc.
    • MBS206
      NC MX5

      By MBS206 · Posted

      You should have got a Maine Coone then. Only thing is they're big. But so cool, and just like a dog. Or, just get yourself a high performance dog. That'll teach you for wanting Parkour indoors 😛
    • MBS206
      UniClutch

      By MBS206 · Posted

      Are you thinking of Bens R32? I don't remember if his went through the bonnet itself, but it went through the chassis rail. Brad (RISKIN) bought it, and turned it into a track car. It's funny how anti people are of Jim Berry now. I remember when I pulled mine out (during an engine change) and inspected it and found it cracking badly. At that point in time so many people were even on SAU, were so pro Jim Berry, and that was after Bens GTR exploded his quite publically.
×
×
  • Create New...