Jump to content
SAU Community

Recommended Posts

Hey guys. I was looking to buy my first Skyline, did my homework, looked around and ended up pretty happy with this R34 GTT. Picked up the bank cheque this morning, spent 1.5k on some fresh rubber and some stockies as he wanted to keep the rims, sorted out all the insurance, even had the transfer of ownership forms filled out and ready to be signed.

Did an inspection and compression test as a last thing this afternoon. Everything was looking good, no accident damage, no rust. Just needed new tyres, new brake pads..stuff like that. And then... compression test results:

160

150

105

155

100

110

:ermm:

It was totally unexpected, as the car runs smoothly, doesn't blow smoke or cough and sputter. Was really only doing it as a last peace of mind kind of thing. :l

The question now is, is it worthwhile getting a second opinion? It just seems kind of weird that not one.. not two.. but 3 of the 6 cylinders are leaking so badly, while the others are going strong at 150-160. I'm thinking it could be a dodgy test, but the mechanic said he double checked and got the same numbers, so I'm not too sure..

I'm really quite dissapointed :l If everything checked out, it would be in my garage right now!! :blush:

Has anyone here been in a similar situation or have any advice? Not too sure where to go from here :S

Thanks guys

Lyndon

I think its more likely to be incorrect compression test results unless it is running like shit or blows heaps of smoke on boost.

was it warm when you tested it

was the battery fully charged

was the cas unplugged

was the throttle fully open while cranking

was it a screw in or push in type of tester?

Surely the mechanic who compression tested it also did a leakdown test afterwards to tell you WHY the compression is down right?

If not, then get a second opinion. Sounds dodgey. I have replaced 2 comp test gauges in the last 4 years. They don't last forever

Thanks for the replies guys. The car was driven to the workshop, which is about a 30 min journey at freeway speeds, so I'm guessing it was done warm?

That's the thing though.. it drives very smoothly and doesn't blow a puff of smoke even when revved up to 6k rpm. Not sure what kind of test was done though, we just left it at the mechanic's and went to grab the transfer forms and transferred the car back onto regular plates. :S Was done at a workshop I found in the WA consolidated workshop thread, and was recommended to me by forum users D:

Had a chat with the seller, he looked genuinely surprised and said he definitely wants to pay for a second opinion, so I guess I'll wait for the results of that and take it from there. :S

Also, just curious- how does the leak down test actually work? I've heard it mentioned here and there, but not 100% sure what it actually means :S

Thanks guys :ermm:

Leak down test is similar to a compression test, but it measures pressure loss instead of pressure.

What they do is remove all the spark plugs, screw in a threaded coupling attached to a leakage gauge, and then feed about 80-90psi of compressed air into the cylinder. Any more than 30% leakage and you have a problem.

Leak down tests also make it alot easier to diagnose what the problem is, as Daniel pointed out. For example if you can hear the air coming out of the throttle body that would indicate a leaky intake valve. Or if a cylinder has poor compression but minimal leakage, that would usually indicate a valve-train problem, such as a collapsed lifter or worn cam lobe, etc.

i would probably say to get a second opinion if you're really keen on the car.

if you're not, or if the second test comes back bad, WALK AWAY!!

the last thing you want is to buy a Skyline that you know is going to need work, its not cheap.

and those that say it is cheap are lying.

Yeah.. if the second result is consistant with the first, I wouldn't hesitate to walk away. :blink: It's just that I'm not sure if the result is accurate. Would be a pity if I gave up on this one due to a dodgy test, as the mechanic said everything else was in top knick :l

Lol that's ironic James. The place I took it for the first test was Allstar Garage literally across the road from Hyperdrive xD

Will give them a ring tmr to see if they can book me in later this week.

Cheers

Allstar Garage are my favs... Sean is the best in my opinion. No harm getting a second test done though, better to be safe than sorry, especially if the owner is paying for it. How long in advance did you book in at Allstar lol, they book out like 2 weeks in advance... Suppose it wasn't being tuned though.

Definitely walk away from it if the tests come back dodgy, there are plenty of R34's out there, would suck if you bought one of the lemons.

Allstar Garage are my favs... Sean is the best in my opinion.

I spoke to Sean on the phone and he managed to squeeze me in the very next day :D

It wasn't him who did the test though..was one of the younger mechanics.

Seller said he'll get it done again today.. will let you guys know how that goes.

I really am quite keen on this car! But if the results concur with the first... :D

Fingers crossed! :)

He was tied up with work, msged me saying he'll do it today with a kit he borrowed from work, as he's a mechanic. If that checks out, I'll get him to do another infront of me and then if a garage can verify it, I'm happy to take the car off him :) I'll let you guys know how it goes hopefully later tonight :S

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...