Jump to content
SAU Community

Recommended Posts

hey guys, just a quick question.

I'm 24 and manage a small resort on the gold coast, iv got an r32 25/30 ect ect. but would like to look into buying an R35 however...im told that im not allowed to test drive an r35 i have to have the sales/rep drive it because im under 25yrs old.

i personally would like to test drive it myself, an r35 isnt suited to every person and i dont want to buy one then find out its not 110% what i want, unlikly, but do you know where im comming from?

i would like to test drive a few different cars that i have on my hotlist but i will have the same problem everywhere... im not in a hurry to buy, but it would be a bit annoying to have to wait till im 25 just to test drive?

any advice would be muchly appreciated...

CJ

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/
Share on other sites

hopefully a generous SAU memeber can help you out.

as an aside most of the current aussie owners bought their r35 sight unseen (undriven) fwiw. if you can't get a drive i would only suggest this: if you are after a part time track car (which also makes a decent road car) then buy it. If you arent interested in track duties i would go with something else.

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5199642
Share on other sites

yeh totally understand that, i been reading for a long while, been going through this part of the forum since the begining.

do many people buy cars now without test driving? i know my old boss ordered a brand new clubby for his wife without either of them test driving one, and now she doesnt like it.

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5199647
Share on other sites

" most of the current aussie owners bought their r35 sight unseen (undriven) "

Yep I did.....Placed my order in 2008 (10k Deposit) and had to push to get one by mid 2009 .....

Should be easier now....if they know you are serious despite your age.

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5199656
Share on other sites

exactly, not allowed to test drive because im under 25, and they think i just want to take it for a joyride... but im acually serious, so im stuck.

maybe i should just rock up the dealership driving a volvo? haha

but seriously, Godcla, when you first got in yours and drove it home (or where-ever) was there ANYTHING that you had the thoughts of "oh i wish i knew that earlier..." ??

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5199659
Share on other sites

do many people buy cars now without test driving?

Never for me!

New or old? Never!

Not every car suits one's spine. Not every car can be configured to suit one's spine. I'm 61. I have a good back. But I've been in cars before where after 15 mins, I know that I wouldn't want to be in this thing for 2-3 hours.

I do corporate health lecturing now and then. Once we lectured @ Caltex & Ampol and there were guys there that needed special seats configured to their back (and not just the sprung base ones).

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5199666
Share on other sites

exactly, totally agree with you Terry. hence why id like to test drive it first...

any R35 owners on the Gold coast here that wouldnt mind taking me for a ride? (your car so im not driving it, id feel easier driving a dealerships car)

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5199672
Share on other sites

exactly, not allowed to test drive because im under 25, and they think i just want to take it for a joyride... but im acually serious, so im stuck.

maybe i should just rock up the dealership driving a volvo? haha

but seriously, Godcla, when you first got in yours and drove it home (or where-ever) was there ANYTHING that you had the thoughts of "oh i wish i knew that earlier..." ??

I insisted on conditional on Test Drive.......so when they got their first R35 they let me drive it and I loved it.

I am sure you could manage the same by showing them that you are serious.......their main concern would be

your ability to pay for such a Car...........so if it's finance you better show them them some mighty big pay slips.

Good Luck.....

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5199890
Share on other sites

Yep as long as you prove in some way that you're serious or have the funds for it they'll probably let you take it around the block. Alternatively I'm sure you could offer an existing R35 owner some cash to have a quick test drive :)

Unless their dealership car demo insurance only covers 25+ people driving it?

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5199936
Share on other sites

Birds: yes most dealerships have the 25+ policy, however iv heard that some use it as an excuse to stop us from taking it for a joyride.

Godcla: i did think about taking my bank statement in to prove im gettin a huge sum to cover easily...

id offer some fuel money or something if someones close to me, but as i said i dont feel comfortable driving their car lol. most of you wouldnt even let your wife drive it!? yet along a stranger...

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5199947
Share on other sites

Rock up with a briefcase full of cash, point to the car and say "I'm either going to test drive that car, love it and give you this briefcase or im going to find some one that does, so what's it going to be?"

Always a way around it, you just got to be more assertive.

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5200567
Share on other sites

hello again guys,

Well today i looked up the nearest Nissan Dealership, ended up being "Von Bibra Gold Coast Nissan".

Headed over there and had to wait to see the manager, Max Johnson, as he is the only one that is currently doing the sales on these cars (anyone bought from this dealership?)

He was great and answered every question i had, if he was unsure on something he got one of the 2 GTR mechanics (only 2 mechanics there work on the GTR's) to come up and explain to me about it.

I was then able to go on an hr test drive with him, he drove for about 10min then we swaped and i drove the rest, got to drive some back streets then he offerd to direct me to the M1, which i happily accepted. Ended up test driving the 09 non premium one, however i'm leaning towards the 2010 Premium Black. Drives so nicely, i fully understand that daily driving it in the city is like caging a tiger, however let that tiger out in the plains...:D

Certainly put a smile on my face that is still on my face 4hrs later!!

Couple of questions:

1: How many of you use the paddles? or normal driving just keep it in auto? obviously, when u want to move you'l use the paddles...

2: Do you find the gear change a bit more hash when driving slower, then if your mildly into it?

Anyways id highly recommend talking to Max about any enquires people may have, he was very helpful to me, and not once made me think i was just that young guy after a joyride.

Thanks for reading my rant haha.

CJ

Edited by -_-StRyDeR-_-
Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5204221
Share on other sites

Hi CJ,

Good to see you finally managed a test drive!

As far as your questions are concerned:

1. I never drive the car in auto, as it is boring. The auto shuffles up through the gears to the highest gear possible very quickly. The way the gearbox works with the paddles is impressive. If you get a mid-pipe (you should), I guarantee that you will drive in manual mode to hear the throttle blips on down changes and you will hold gears longer than in auto for better acceleration.

2. The gearbox does seem to change gears smoother when the car has a higher rate of acceleration. The first to second change is the most harsh for me. Over time, I seem to have learned which points in the rev range give the smoothest shifts.

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5204281
Share on other sites

" Couple of questions:

1: How many of you use the paddles? or normal driving just keep it in auto? obviously, when u want to move you'l use the paddles...

2: Do you find the gear change a bit more hash when driving slower, then if your mildly into it? "

Loved using the Paddles for first few months then started using Auto more....depending where I drive now

if I'm going along a fairly straight long country road..... I do fairly often it will be in auto but then around town

using manual is a lot more fun....

Most true SuperCars will be a little awkward at low speeds and in heavy traffic......and the R35 is a SuperCar.

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5204398
Share on other sites

" Couple of questions:

1: How many of you use the paddles? or normal driving just keep it in auto? obviously, when u want to move you'l use the paddles...

2: Do you find the gear change a bit more hash when driving slower, then if your mildly into it? "

I use paddles when I'm not on the phone or chatting with a passenger, otherwise just trundle along in Auto. But I find it way smoother just slowly driving in Auto, so smooth that if you didn't hear the motor you wouldn't know it had changed gear. When I'm hard into it it changes so hard sometimes that I see the traction control light kick in on the 1st to 2nd change when it's set to standard VDC setting. (Then again that could be a symptom of my overly eager VDC which I've discussed elsewhere.)

Link to comment
https://www.sau.com.au/forums/topic/318126-test-drives/#findComment-5205008
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...