Jump to content
SAU Community

Recommended Posts

hey guys,

Ive been reading about power bands lately, and its apparently quite important to know your cars when it comes to racing especially in the case of a naturally aspirated car.

My question is, how do you know what your power band is? Is it just drive and feel it for yourself or does each car have a power band that any common car owner can tell you?

I've also wondered about when racing, is it best to shift out of first at say 4 rpm and then build the revs in the higher gears or is it better to rev it higher in first? I feel like when I rev high in first im not really getting as much power as if I let it rev in second, and I just feeling the wrong thing?

I've never actually looked at the speedo while testing all this as im worried about keeping my eyes off the road.

Any help is greatly appreciated, one of my friends beat me in his celica the other day and all the stats show that my car should have won if my technique was better, so im trying my best to better understand everything.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/318812-power-band/
Share on other sites

The RPM where you feel your car pulling is where the power band is. Look at horsepower and torque curves (dyno graphs) on google and you will see exactly what a power band looks like. You will want to launch your car with your engine revved such that after the clutch grabs the needle drops to around the RPM where the torque curve for your car shows it is a constant level (not where it is rising steeply) so you get a strong pull at takeoff. Does that make sense?

High revving lower displacement engines such as VTECs have the peaky power (in the top end of the RPM range) but larger displacement N/A engines can have more torque in the low end too (i.e. Nissan 350z/370z).

Link to comment
https://www.sau.com.au/forums/topic/318812-power-band/#findComment-5219785
Share on other sites

having been on track on 2 stroke road bikes i can tell you changing gears is pretty much the same no matter what your in/on. you want to shift from first into second only when doing so will result in more acceleration, for 99% of vehicles this means changing at redline. with actual 2 stroke machines with proper powerband, changing early can result in having almost no power as they often only make any real power in the top 20% of their rev range. as to a good launch, as much as it may kill your clutch, to do a perfect launch on the bike i would simply give it full throttle at take off and slip the clutch out keeping the revs at around 12k (where the bike its max power). not 100% on doing this in a car but definitely the way to go on the bike.

Link to comment
https://www.sau.com.au/forums/topic/318812-power-band/#findComment-5223193
Share on other sites

  • 3 weeks later...

i've read in a couple of places that the powerband can be shifted by changing cams or using cam gears, how does this work?

when it comes to changing gears, it depends when your car falls off its power band, this may be at 6500, or (more likely) much higher, like 8000rpm.

think of the power curve of the engine, you always want to be accelerating as hard as possible, so if you change at 4000rpm you're missing out on 4000-7000rpm goodness, which is where most of the power is. theoretically, the higher the rpm, the more explosions per second, the more power, but all sorts of efficiency issues get in the way. still, higher rpm = higher power. in f1 when they want to dial back the power to save the engine/fuel, they turn it's redline down.

Link to comment
https://www.sau.com.au/forums/topic/318812-power-band/#findComment-5266924
Share on other sites

Generally - the larger the cams, the more revs are needed to get the engine to make power e.g at set of 280deg 11mm lift cams on an RB25DE would need 4500-5000rpm before it started to make power, below that the airflow through the ports is very slow and inefficiant, So you then need to rev the engine harder eg 9000rpm redline in order to have a decent power band, if the engine only revved to 7000, you would only have 2000rpm where the engine makes any grunt, so each time you changed gear you would drop out of the power and go no where.

Think of big cams like you would a big turbo...kinda

Link to comment
https://www.sau.com.au/forums/topic/318812-power-band/#findComment-5266947
Share on other sites

i've read in a couple of places that the powerband can be shifted by changing cams or using cam gears, how does this work?

when it comes to changing gears, it depends when your car falls off its power band, this may be at 6500, or (more likely) much higher, like 8000rpm.

think of the power curve of the engine, you always want to be accelerating as hard as possible, so if you change at 4000rpm you're missing out on 4000-7000rpm goodness, which is where most of the power is. theoretically, the higher the rpm, the more explosions per second, the more power, but all sorts of efficiency issues get in the way. still, higher rpm = higher power. in f1 when they want to dial back the power to save the engine/fuel, they turn it's redline down.

also you are missing out on 3000rpm of accelerating in a lower gear with an easier ratio. that is where the argument of "what rpm to change gears at" starts to get a bit more complicated. a simple view is to change gears the moment you get past the peak power output. what this doesn't take into account is that even though the power may be dropping off, it may still be higher than at the rpm you will be at in the next gear. and then as i said above, the more time you spend in the lower gear (within reason), the easier the car will accelerate, especially when you are talking about the higher gears. that is where each car needs to be evaluated individually to see what works best. i know that in the case of the missus SSS pulsar, with the stock headers it would start to choke around 5500rpm, and it was pretty much pointless to rev it past 6500rpm. put on a set of extractors and it doesn't start to choke until about 6500rpm but will still pull all the way to the 7500rpm redline.

Link to comment
https://www.sau.com.au/forums/topic/318812-power-band/#findComment-5267237
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...