Jump to content
SAU Community

Recommended Posts

from what i understand, someone had an accident into him, and as he was putting the car onto a towtruck, someone hit the car again

yeah thats what happened. parked car in no standing zone, car into of me hit the brakes to avoid it, i hit brakes and stopped and the car behind me locked up and slid into me pushing mee foreward. then when the other cars had left and the tow truck came for me, the towy backed up and as he was about to put the tray down another car ran into it at speed and rammed it under the back of the tow truck :thumbsup:

Shit it's going to be a tricky one for insurance.... who pays for what?!

Lucky both cars that hit me had insurance. the frist guys insurance told me they will try to asess how much damage was accured in the first accident, dunno how they'll work that one out, the cars about a foot shorter now.

sorry dude. i know where a blue s13 silvia is if your interested. ca18e/auto has hail damage but for $1100 could make it into something good, has hicas, sunroof, original mags, same colour as mine. hail damage has effected bonnet boot, top of doors. windscreen. but for track car, cheap cheap body. i almost bought it last week, just to put back on ebay and make a few hundred easy dollars.

gonna wait abit and see if i buy back the wreck first. thanks anyway :)

  • Replies 185
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Damn I didn't get here in time :( This will be the first DECA I haven't raced in since I first started :wub:

Oh well I'll still come up. I can Marshall on the mini wang if you guys like?

Bad luck mate, what broke?

I will take you off the list and bring on the first reserve. All pull outs will be refunded after the event.

Not sure mate. Front of the head is knocking; i'm thinking a lifter, valve spring seat, etc.

Going to also pull the oil restrictors out the block. The combination of N1 pump and 1.5mm oil restrictors is not working for my engine, the head has always been noisy on idle, since the rebuild. Also going to do a couple of other small tweaks; i'm useless, just can't help myself :banana:.

Its not the VCT clicking...?

RB20's don't have that do they? :D

Hey Leon.

I went moto riding with Andy on the weekend. He told me you bought his car. Are you bringing that to DECA? See if it can handle more than 1 run?

Not sure mate. Front of the head is knocking; i'm thinking a lifter, valve spring seat, etc.

Going to also pull the oil restrictors out the block. The combination of N1 pump and 1.5mm oil restrictors is not working for my engine, the head has always been noisy on idle, since the rebuild. Also going to do a couple of other small tweaks; i'm useless, just can't help myself :P .

damm i haven't seen a rb25 do a lifter or a valve spring seat. Does it still run smooth ? i.e not misfire or huge unusual lump in the engine cycle.

RB20's don't have that do they? :)

is this how you humour yourself ? rb20's don't have vct, or a bullshit oil feed going to the front of the head

oh and for the rb20 bashers, look at who won deca last time.

RB20's eat dick russell you know that :P

Campbell

When your RB25 pos beats me then I'll listen to what you have to say :) Actually if it ever makes it to Deca I will!

oh and for the rb20 bashers, look at who won deca last time.

"cough" the results where rigged "cough"

hahahaha gazelle d's breath smells like Russell's dick

and Dean i'll sort you out on the way to superlap woot woot superlap

Campbell

Not a problem. List updated. Tim or campbell make youselves useful and tell Dean he is in for deca and to pay up :blink: cheers.

Told him on the weekend but will remind him today as we just got back from Superlap last night

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...