Jump to content
SAU Community

Recommended Posts

i didn't check out your new tyre's last time, but atleast you had grip unlike last aug.

You have a better memory than me...? Did I burn the semis then?

be careful with KU-36's in the wet.

I don't understand why people say that ku36's aren't good in the wet??? They are soft street tyres!!! Not semi slicks like people keep saying.

The tread pattern has more than enough for water dispersement.

  • Replies 185
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

You have a better memory than me...? Did I burn the semis then?

I don't understand why people say that ku36's aren't good in the wet??? They are soft street tyres!!! Not semi slicks like people keep saying.

The tread pattern has more than enough for water dispersement.

i dont find them very good in the wet, but i think i only say that is because i used to have very good street tyres and went to these that are good in the dry but are no where near as good as my old tyres in the wet. not that ive lost control or anything with them in the wet but i feel that they are a bit skittish and unpredictable in the wet compared to my old ones. (old tyres were michelin pilot sports)

I don't understand why people say that ku36's aren't good in the wet??? They are soft street tyres!!! Not semi slicks like people keep saying.

The tread pattern has more than enough for water dispersement.

This has been my experience too. I tested them the first time it heavily rained after fitting them and they pulled up as quick, if not quicker than my original tyres (which still had tread left). Not saying they're awesome wet weather tyres, but they're certainly not terrible.

But good news anyway, bom.gov.au is now saying no rain for Saturday.

I'm surprised to at what people don't think is any good in the wet. A good set of semis is far better in the wet than plain old road tyres. I found my old A048s were far better than road tyres at Winton in the wet. I don't put the ku36s in that class but I would expect them to be more than capable in the wet.

Can't wait for sat!

I'm surprised to at what people don't think is any good in the wet. A good set of semis is far better in the wet than plain old road tyres. I found my old A048s were far better than road tyres at Winton in the wet. I don't put the ku36s in that class but I would expect them to be more than capable in the wet.

Can't wait for sat!

Semis are definantly better in the wet than streets once they warm up. When they are cold they are terrible. A050s are the only exception as they arent too bad cold... thats why they cost the most i guess.

I want to enter this next round, what cams licence do i need to get to go in this as well as for drift days?
CAMS is $100/12 months and you must have club membership with a CAMS affiliated club (I see you have SAU Vic members, so no problem).

Link - http://cams.com.au/en/Development/Get%20In...ce%20Types.aspx

You need to get the Level 2 Speed License

AASA is $50/12 months

Link - http://australianautosportalliance.com/aas...9&Itemid=45

You need the Club Racing License

If you are able to arrange one before the day of the event, it makes your morning and my morning much easier.

Id do it ASAP, and make sure you tell them you need it by the competition date.

Otherwise, you can fill out a form and pay on the morning of the event.

Regarding which license to get - its completely up to you and which events you plan on doing in the future.

If you have any intention of going to Sandown or Phillip Island, they will only accept CAMS.

If you are just planning on doing our DECA's and maybe a Winton, get AASA.

Your call :)

Hope this helps

interesting to read that slicks can be good in wet. but yeh i don't know how you guys get enough heat into them for a deca day. with the spread out driving format i'm not going to consider it.

You have a better memory than me...? Did I burn the semis then?

I don't understand why people say that ku36's aren't good in the wet??? They are soft street tyres!!! Not semi slicks like people keep saying.

The tread pattern has more than enough for water dispersement.

i hear that often. you basicly had no traction on the skidpan in a straight line. i found it quite interesting at the time, and you were complaining about tyres at the mexican joint. my mate Karlos (the blue VN guy) and i were sitting at the table near you

having a chat to a supra driver a status tuning today he said someone rolled there car at deca last weekend on the back track they were going pretty hard and come off and over it went..got a nistune for the stagea today 164 kw and a bit more response so see how it goes on the skid pan

Ouch...did he say if it was a 4WD? You can roll a car almost anywhere as long as you have something to tip the centre of gravity :)

Ouch...did he say if it was a 4WD? You can roll a car almost anywhere as long as you have something to tip the centre of gravity :)

That's it. I know a number of cars have had big accidents out on the back track. Years ago (prob '99ish) I saw a very high powered Datto 120y hit the tree, going clockwise towards the 2nd hill, coming out of the lh sweeper. Destroyed it. Earlier that day his daughter lost it into the first turn, went through the fence into the paddock where the houses are now. That was a sprintrun by the Shep car club. I was running in my red mazda (in my avatar)

Thanks to everyone pointing me in the direction of tyres. Kumho has no 225-45-17s in stock in nsw or vic. Luckily Essendon tyre power had a very good set of second hand 225s which suit me perfect! 225s front, 255s rear. Thanks again guys! Can't wait for Saturday!

That's it. I know a number of cars have had big accidents out on the back track. Years ago (prob '99ish) I saw a very high powered Datto 120y hit the tree, going clockwise towards the 2nd hill, coming out of the lh sweeper. Destroyed it. Earlier that day his daughter lost it into the first turn, went through the fence into the paddock where the houses are now. That was a sprintrun by the Shep car club. I was running in my red mazda (in my avatar)

Thanks to everyone pointing me in the direction of tyres. Kumho has no 225-45-17s in stock in nsw or vic. Luckily Essendon tyre power had a very good set of second hand 225s which suit me perfect! 225s front, 255s rear. Thanks again guys! Can't wait for Saturday!

Was your Series 4 down at Centreline in the past couple of weeks? They had one down there that looks just like the one in your avatar.

Was your Series 4 down at Centreline in the past couple of weeks? They had one down there that looks just like the one in your avatar.

That's the series 1 in his avatar.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...