Jump to content
SAU Community

Recommended Posts

I have searched other threads, however they are mostly around a year old when people first started hearing about BC. I just wanted to get an updated opinion or whether people have had direct experience with these coil overs?

I'm thinking about buying these for my 33. I don't do track days, I don't drift, I daily drive and give it a squirt every know and again. I'd basically just prefer the car handle a bit better on the road and with less body roll.

http://www.justjap.com/store/product.php?p...at=0&page=1

These are the ones I'm referring to.

Link to comment
https://www.sau.com.au/forums/topic/319277-bc-racing-coilovers/
Share on other sites

I have bc br type coilovers in both my 33 and 13. Very stiff coilovers and very good height adjustment. I would say a little too stiff for a daily if your not actually looking for that kind of stiffness. However I would recommend them. And you get cool little plastic signs and shit in the box :D

All the S Chassis boys swear by these things, I don't think I've seen one bad review of them yet! They get compared a lot to Greddy Type S Coilovers. Some even say they come out of the same factory but no-one actually knows if it's true or not. a lot of it depends on existing suspension condition before the coilovers go in. I'm contemplating a set of the BC BR's .

It all depends what your using them for....Daily driving, Hardparking or Track work they all have different needs.

Im interested to find out opinions on these as well. I am looking at the BC ER Series with the external reservoirs for a 32 GTR. They are listed with pillowball mounts and spring rates are F:10kg/mm and R:7kg/mm but im enquiring about getting the setup with normal top mounts and spring rates of F: 7kg and R: 5kg as a max.

http://justjap.com/store/product.php?produ...=422&page=7

The car is mainly street with a track day once a month or so.

Some opinions on these would be great. Or some possible alternatives around the 1700 mark.

Cheers.

If you guys are not interested in buying the BC kits anymore i can sort out some coil overs that can give a more comfort ride that does not give away to much performance for around the some price. I can get them for $1250 and if you require any specs they are on the XYZ performance site but they have been modified to suit our specs, we have done all the r&d work on them here at Wholesale Suspenion and i can say they perform well.

The latest AutoSalon did a review of the BC V1's and gave them a decent wrap. They rated them 75/100 overall which isn't bad for the base models. So should expect the higher models to be even better! Getting more and more convinced by these the more I read about them. For everyday street use they shouldn't be too bad at all.

Yeah mate, am considering a purchase of the RM edition of these BC Racing coilovers as BR is turning base model when V1 dies out and ER is too hardcore :). For only $100 more than BR it has a few more tricks up it's sleeve. Haven't found any for R32 GTS-T yet though...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...