Jump to content
SAU Community

Bypassing Air Flow Sensor

1R0NMAN 33
 Share

Recommended Posts

1R0NMAN 33 Rookie

1R0NMAN 33

Posted
Posted

hey can anyone help me? i need to find out how to bypass or completely get rid of (preferably get rid of) my airflow sensor in my R33.

i am on a tight budget so if there is a cheap way that would be awesome if not it would be great to know, it has to be done.

thanks :P

Link to comment
https://www.sau.com.au/forums/topic/320129-bypassing-air-flow-sensor/
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

well you could simply unplug it. just don't plan on having a very good idle or being able to rev the car above about 2500rpm.

other than that, expect to pay a few thousand as said above.

maybe you should tell us why you need to get rid of it so we can give you other suggestions. if you are hitting the airflow cut (rich and retard) then something like a nistune will solve the problem, but will still cost you up to around $1000

1R0NMAN 33 Rookie

1R0NMAN 33

Posted
  • Author
Posted
well you could simply unplug it. just don't plan on having a very good idle or being able to rev the car above about 2500rpm.

other than that, expect to pay a few thousand as said above.

maybe you should tell us why you need to get rid of it so we can give you other suggestions. if you are hitting the airflow cut (rich and retard) then something like a nistune will solve the problem, but will still cost you up to around $1000

thanks and i know it would run like shit if i just unplugged it, thats why i haven't. it is just in the way i can barely get my filter on the

end of it. and i know how to bypass and add in another air filter that doesn't run through the sensor. i know that helps with getting

more air through just have to tweak the sensor a little pretty simple but this leaves me with the problem of space and not being able

to fit my filter in. and while i'm asking is there any real difference in types of after market pod filters. thanks agin for your help(all)

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

^ ye... a bit odd. Just mod the piping. Removing the AFM as i said before, will cost 2k minimum.

Use the factory airbox, a pod is pointless on it's own anyway mate.

Just sell it and put it down as a lesson learned.

1R0NMAN 33 Rookie

1R0NMAN 33

Posted
  • Author
Posted
WTF, just mod the intake pipe so it suits the air flow meter and you pod filter, easy!

true huh damn :3some: i'm an idiot at times i never even thought of that cheers dude. its always the most simple thing that slip the mind when trying to think

1R0NMAN 33 Rookie

1R0NMAN 33

Posted
  • Author
Posted
^ ye... a bit odd. Just mod the piping. Removing the AFM as i said before, will cost 2k minimum.

Use the factory airbox, a pod is pointless on it's own anyway mate.

Just sell it and put it down as a lesson learned.

oh a pod is not the only thing done to my car. and i'm pretty sure i need it

iseekool Veteran

iseekool

Posted
Posted

Depends what mods you have...

But from what I gather (by reading your sort of post) is your engine is not modified. The stock air box will be more than capable.

Probably best note down your modifications and people can help you better on deciding on the next step.

1R0NMAN 33 Rookie

1R0NMAN 33

Posted
  • Author
Posted

Depends what mods you have...

But from what I gather (by reading your sort of post) is your engine is not modified. The stock air box will be more than capable.

Probably best note down your modifications and people can help you better on deciding on the next step.

[/quote

3" 1/2 exhaust turbo back, split fire coil packs, t4 turbo, greddy inter cooler, boost controller, pod filter, so is this a non modified car? whats a modified one like?

im just not fully up there with everything to do with cars thats why i'm asking for help so i can learn.

iseekool Veteran

iseekool

Posted
Posted

Depends what mods you have...

But from what I gather (by reading your sort of post) is your engine is not modified. The stock air box will be more than capable.

Probably best note down your modifications and people can help you better on deciding on the next step.

3" 1/2 exhaust turbo back, split fire coil packs, t4 turbo, greddy inter cooler, boost controller, pod filter, so is this a non modified car? whats a modified one like?

im just not fully up there with everything to do with cars thats why i'm asking for help so i can learn.

Cool. Stock airbox is up to the task. :) Your current setup isn't too bad.

Your current setup doesn't need map based system - the gains will be very minimal vs cost.

Best spend the money on a dyno tune/re-map - you will be surprised how much more power you get - the car will still be very streetable. IMHO

It will also give less excuse for the boys in blue to dong you as hard - just remember to hide your boost controller :3some:

Changing to a MAP based system (ECU etc.) will probably only benefit if you are going to go for much more power - which will mean larger injectors, cams, list goes on.... which unfortunately means more $ to spend.

Since you are on a budget, a re-map is probably going to be the best bang for buck upgrade with your current setup.

1R0NMAN 33 Rookie

1R0NMAN 33

Posted
  • Author
Posted
^ Yep, factory airbox is still more than adequate and more beneficial if the POD is not enclosed and CAI employed.

Open pod + engine bay = worse than the airbox = worse performance.

i have a custom built air box surrounding my pod filter it is made of sandwich plate aluminium

so its a great insulator, and vents just above in the hood for extra coolness. thanks for the help looks

like i'm just gonna have to get a re map for now then just save save save, because i want more

power i'm greedy thanks guys i appreciate the info

99 GTT Rising Star

99 GTT

Posted
Posted (edited)

I do beleive MINES still uses the stock air box on all his cars and look at the power and performance he makes from his cars. (Good enough for one of the best tuners - Good enough for me)

Pod = waste of time and attract the wrong attention.

Edited by 99 GTT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...