Jump to content
SAU Community

Recommended Posts

hey can anyone help me? i need to find out how to bypass or completely get rid of (preferably get rid of) my airflow sensor in my R33.

i am on a tight budget so if there is a cheap way that would be awesome if not it would be great to know, it has to be done.

thanks :P

Link to comment
https://www.sau.com.au/forums/topic/320129-bypassing-air-flow-sensor/
Share on other sites

well you could simply unplug it. just don't plan on having a very good idle or being able to rev the car above about 2500rpm.

other than that, expect to pay a few thousand as said above.

maybe you should tell us why you need to get rid of it so we can give you other suggestions. if you are hitting the airflow cut (rich and retard) then something like a nistune will solve the problem, but will still cost you up to around $1000

well you could simply unplug it. just don't plan on having a very good idle or being able to rev the car above about 2500rpm.

other than that, expect to pay a few thousand as said above.

maybe you should tell us why you need to get rid of it so we can give you other suggestions. if you are hitting the airflow cut (rich and retard) then something like a nistune will solve the problem, but will still cost you up to around $1000

thanks and i know it would run like shit if i just unplugged it, thats why i haven't. it is just in the way i can barely get my filter on the

end of it. and i know how to bypass and add in another air filter that doesn't run through the sensor. i know that helps with getting

more air through just have to tweak the sensor a little pretty simple but this leaves me with the problem of space and not being able

to fit my filter in. and while i'm asking is there any real difference in types of after market pod filters. thanks agin for your help(all)

^ ye... a bit odd. Just mod the piping. Removing the AFM as i said before, will cost 2k minimum.

Use the factory airbox, a pod is pointless on it's own anyway mate.

Just sell it and put it down as a lesson learned.

WTF, just mod the intake pipe so it suits the air flow meter and you pod filter, easy!

true huh damn :3some: i'm an idiot at times i never even thought of that cheers dude. its always the most simple thing that slip the mind when trying to think

^ ye... a bit odd. Just mod the piping. Removing the AFM as i said before, will cost 2k minimum.

Use the factory airbox, a pod is pointless on it's own anyway mate.

Just sell it and put it down as a lesson learned.

oh a pod is not the only thing done to my car. and i'm pretty sure i need it

Depends what mods you have...

But from what I gather (by reading your sort of post) is your engine is not modified. The stock air box will be more than capable.

Probably best note down your modifications and people can help you better on deciding on the next step.

Depends what mods you have...

But from what I gather (by reading your sort of post) is your engine is not modified. The stock air box will be more than capable.

Probably best note down your modifications and people can help you better on deciding on the next step.

[/quote

3" 1/2 exhaust turbo back, split fire coil packs, t4 turbo, greddy inter cooler, boost controller, pod filter, so is this a non modified car? whats a modified one like?

im just not fully up there with everything to do with cars thats why i'm asking for help so i can learn.

Depends what mods you have...

But from what I gather (by reading your sort of post) is your engine is not modified. The stock air box will be more than capable.

Probably best note down your modifications and people can help you better on deciding on the next step.

3" 1/2 exhaust turbo back, split fire coil packs, t4 turbo, greddy inter cooler, boost controller, pod filter, so is this a non modified car? whats a modified one like?

im just not fully up there with everything to do with cars thats why i'm asking for help so i can learn.

Cool. Stock airbox is up to the task. :) Your current setup isn't too bad.

Your current setup doesn't need map based system - the gains will be very minimal vs cost.

Best spend the money on a dyno tune/re-map - you will be surprised how much more power you get - the car will still be very streetable. IMHO

It will also give less excuse for the boys in blue to dong you as hard - just remember to hide your boost controller :3some:

Changing to a MAP based system (ECU etc.) will probably only benefit if you are going to go for much more power - which will mean larger injectors, cams, list goes on.... which unfortunately means more $ to spend.

Since you are on a budget, a re-map is probably going to be the best bang for buck upgrade with your current setup.

^ Yep, factory airbox is still more than adequate and more beneficial if the POD is not enclosed and CAI employed.

Open pod + engine bay = worse than the airbox = worse performance.

i have a custom built air box surrounding my pod filter it is made of sandwich plate aluminium

so its a great insulator, and vents just above in the hood for extra coolness. thanks for the help looks

like i'm just gonna have to get a re map for now then just save save save, because i want more

power i'm greedy thanks guys i appreciate the info

I do beleive MINES still uses the stock air box on all his cars and look at the power and performance he makes from his cars. (Good enough for one of the best tuners - Good enough for me)

Pod = waste of time and attract the wrong attention.

Edited by 99 GTT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
    • That's some really horrible design with the way it's cut/shaped! Is there much damage to the box that failed in? IE, new fork and you can go again, or is it a total rebuild again? Id be trying to build that piece from scratch, and getting some reliefs added in the corner to hopefully stop breakage, and then swapping boxes ASAP, and then doing the same to the currently good working box. I'm assuming hard shifts have not been friendly to it!
×
×
  • Create New...