Jump to content
SAU Community

Recommended Posts

This thread has me wanting a cool R33 GTS25t....more pics, more details..+ VIDS :thumbsup:

ahh thanks mate, i went to japan for a few weeks thus why there has been no up dates.

the new aftermarket sump has arrived, it holds 3L or 4 Liters more oil, has a fancy pick up in it and mines baffles.

will get some pictures when i head into mercury next.

  • 1 year later...

its been awhile since ive posted in here, been up north for work and havent be able to drive the car much, basically flew back for power play in qld a few months back to drive it and thats about it. A photo was taken of it lapping round qld raceway on the day and put in the latest powercruise magazine under the mercury motorsport workshop pages. (photo below) im the bottom left of the page.

in the last six months a ASR 8 liter sump was installed (photo below) and some rear suspension modifications where done to take away the anti squating that all standard r33 skylines have, rear control arms were installed and a little but of cutting and rewelding of steel on different angels were done to shift the center of gravity from just infront of the rear wheel to just behind the front wheel.

so the rear suspension dropped round 2 inches under power to aid in traction and a new rear wheel alignment is done with 0 tow and 0.5 positive camber so that when the car squats it put 100% of the tire width down for traction.

post-19157-0-44046400-1321007674_thumb.jpg

post-19157-0-39612200-1321008707_thumb.jpg

Edited by GOT04

great build thread, love it. BUT.....beware the PAR gearsets. Ive been through 7, yes, SEVEN of the gtr gearsets and no, im not an advocate. I wish you all the best, looks like it will be an absolute handfull when its on song!

Cheers, Allan

great build thread, love it. BUT.....beware the PAR gearsets. Ive been through 7, yes, SEVEN of the gtr gearsets and no, im not an advocate. I wish you all the best, looks like it will be an absolute handfull when its on song!

Cheers, Allan

hay mate, ta for the comments.

what components broke mainly in the gear set? just curious.

dropped the car off today to get the garrett 42gtx (1000hp) turbo put on.

finding the to4z isnt giving the car the punch its needs to keep up with all the big rigs in brisbane on thursday nights.

the head is going away to to have work on it to fit bigger cams.

looking for full boost round 5200rpm and rev to 8200rpm.

will be interesting to see how the gtx turbo goes with boost over 22psi which is were garrett are claiming that the customer sees the big results.

post-19157-0-77170300-1321609158_thumb.jpg

Have you considered any of the billet wheeled T04z sized turbos 6766 or HTA3794? Usable powerband is what wins races.. Like how Fatgtr found out when he ran a properly built 2.6 with lowmount 2530's with his 2.8 and t51.. Lol

Have you considered any of the billet wheeled T04z sized turbos 6766 or HTA3794? Usable powerband is what wins races.. Like how Fatgtr found out when he ran a properly built 2.6 with lowmount 2530's with his 2.8 and t51.. Lol

Yeah mate of course I consitered it, but what u will find is that thw billet wheels are only an advantage over a so called normal to4z when there on race fuel boost because the wheel doesnt flex over 22psi and it has more blades to pick up air. So a billet wheeled to4z wont give me any advantages on pump which is what im only ever going to use on the street.

The new gtx garrett turbos are a billet wheel btw.

If u have 3000rpm of full boost that is a very useable power band. Not to mention the fast boost thats on all before it. Quick gear changes, short gear ratio from the diff and small diameter wheels all for quick acceleration. It is a 3 liter remember. Torque winz races, not power. Anyway ill let the thread know how it all works out.

Absolutely love this car, saw it years ago in a HPI mag.

Didn't know you were on here.

One of the main inspirations for me to buy my R33 GTST.

Keep up the good work and keep the pics and vids coming!

Absolutely love this car, saw it years ago in a HPI mag.

Didn't know you were on here.

One of the main inspirations for me to buy my R33 GTST.

Keep up the good work and keep the pics and vids coming!

thanks mate! i appreciate it.

got sent a photo today from mercury of the gtx42r put on and piped up, its close to turning key. the head will be awhile so a standard 26 head is in for the time being hill my more serious head is back.

post-19157-0-52962100-1322224114_thumb.jpg

  • 2 weeks later...

Yesterday after I posed the last post I took the car for a short drive with the 500kw. After giving it a solid 1st and 2nd hit the 1st injector did an o ring. The mechanics came road side to fix it and also discovered the fuel rail was leaking too. Today they put a hypertune fuel rail in and had it back on the dyno.

Boost up to 35psi and it made 740hp. 550kw. With standard head still. Looking forward to the race head with this boost.

Seems to be alot of boost for that power. What RPM does it hit 33psi?

Im having a HKS T51R KAI installed in the next week or so on my 3L and last night we saw 500awkw at 23psi on my mates GTR.

Ok well my other mates 25/30 GTK 1000 makes 560rwkw at 28psi with a stock head and poncams.

33psi you should be making at least 550rwkw. Is it a small A/R turbo? Small exhaust?

Seeing as its a GTX42 you should into the 500s quite easily thats all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
×
×
  • Create New...