Jump to content
SAU Community

Recommended Posts

There have been some pm's regarding the exhaust valve.

We will be using a 4 inch electronic remote variable valve, I think it is this one from memory, Trent might recall exactly.

Will update when installed (videos and pics)

247.jpg

The stock transmission oil pan was removed for the first time today ready for the Willall pan.

About 10,000km use, 9,000km of which was on OEM transmission fluid.

1000km and 3 track days on Pentosin FFL4.

Only one transmission oil change at 9,000km. The oil pan has never previously been removed nor the magnets ever cleaned before.

Magnet with metallic shavings/sludge. not magnet pulling metal filings off my fingertips! Used flash in one pic to bring out the metal content better.

The real test will be after the next oil change and pan inspection.

gallery_56949_3818_197101.jpg

gallery_56949_3818_185860.jpg

Did you say you were installing the AMS intercooler?

If so what is your impression of the intercooler Vs the standard coolers??

Im considering the AMS upgrade also.

Thanks.

hasn't arrived yet!

hopefully gets here by Thursday/Friday am

will let you know then

There have been some pm's regarding the exhaust valve.

We will be using a 4 inch electronic remote variable valve, I think it is this one from memory, Trent might recall exactly.

Will update when installed (videos and pics)

247.jpg

what exactly does this do?

Option to make it quieter/less power for on the road?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...