Jump to content
SAU Community

What happened to MINES_DATSUN's thread?

JimX
 Share

Recommended Posts

sammus Grand Master

sammus

Posted
Posted

mines deleted it himself... he was sick of people bitching at him. at the later stages of the thread it got out of hand and if mines didn't delete it, i'm sure a mod would have been tempted to close it.

sammus Grand Master

sammus

Posted
Posted

also note this thread started a few mins after mines deleted the thread.

http://www.skylinesaustralia.com/forums/sh...ead.php?t=32429

hahahaha ^^^ ... p.s - moderators have access to deleted threads.

JimX Grand Master

JimX

Posted
  • Author
Posted

It would have been preferable to have it closed rather than deleted, I don't suppose an admin can resurrect it and just close it. The bad thing about it being deleted is now people will either forget what a knob he is or new users will just not know about his "accidents", and start giving him credibility again. Not to mention start giving him praise over the purchase of his new GTR unaware that he's incapable of driving either 4WD or RWD.

Somehow that thread needs to be remembered. And if he changes his name, we need to be aware of it. I for one am sick of wanktards like him giving out stupid advice and opinions when they have no clue themselves about anything (eg, "GTS-t is not powerful enough, GTR all the way!" "Mobil 1 is the best fuel" "Why are you driving a Maxima?" etc)

I do not like flaming people as a general rule but this guy goes beyond the pale. He knows nothing about cars but pretends to know everything, can't drive, can't write constructive forum posts... so why is he even here? At worst he should stick to lurking, at best he should just bugger off altogether.

sammus Grand Master

sammus

Posted
Posted

he pissed a lot of people off... it's a shitload easier to yell at someone you dislike. plus he didn't pay for the car. oh and it was his second write off. lots of things amounted to 12 pages of abuse.

JimX Grand Master

JimX

Posted
  • Author
Posted

Dave, the reason he copped shit wasn't that he crashed a GTR, it was because (a) he talks bollocks on these forums, (B) he's already crashed another car by being a dickhead, © he didn't pay for either car he wrote off himself, and (d) he wants to replace the car he wrote off with another GTR which he will probably write off in the same way again.

Still, it's not all his own fault. At least some of the responsibility has to rest on his parents.

predator Grand Master

predator

Posted
Posted

I thought users didn't have the right to delete an entire thread if there were posts in it??They didn't use to anyhow! I think that is the way it should be.. People shouldn't always be able to hide the evidence if people disagree with them or set them straight.

I'm fully with JimX - i think that was a very important thread and some important advice and comments in there and some different perspectives. While there were some negatives, it also shows there isn't room in here for people like that and keeps a lot of the wanna be dickheads off here, and hopefully off buying a skyline.

There was a lot of abuse in there, but quite rightly so.. and also some wise words from all sides of the fence i think. It was one of the best threads on SAU for a long time I thought!

predator Grand Master

predator

Posted
Posted

But rrrage.. in real life if you were say, a politician and you called someone a "sheep ****ing homosexual" (for instance), and a journalist went and heard that and publicised that its not as if you can go "oh i take that back, i delete it".. and all associated references and articles on that were deleted like u never said it !?- The real world don't work like that!

Same if you said you wanted to bone your best friend's girlfriend.. then later you just go 'oh I'll DELETE that i ever said that and it'll be all ok".. world don't work like that.. here should be no difference.

strutto Grand Master

strutto

Posted
Posted
Also, dont you think its funny how there have been other people just like him but crashed their GTS etc (or rolled it) and they dont get any shit cos it wasnt in a GTR.......
Only reason I (and others) gave him any shit was cause he pissed me off with his incessant ramblings. I'd already decided he was a wanker within his first 10 posts. I learned to ignore it and just hoped he would get bored with the forums.

As I said in my one and only post in his accident thread, I saw it coming, I always thought he was a wanker, and this just proved it.

Dave, the reason he copped shit wasn't that he crashed a GTR, it was because (a) he talks bollocks on these forums, (B) he's already crashed another car by being a dickhead, © he didn't pay for either car he wrote off himself, and (d) he wants to replace the car he wrote off with another GTR which he will probably write off in the same way again.
:werd:

(e) he's a wanker

(f) he didn't insure a $40000 car

(g) he's a knob

(h) he still believed he was a good driver and was not at fault

(i) he's a fool

(j) he wanted to repair his car, then he didn't, then he did

(k) he's a toss

(l) he's a shit speaker

(m) he's a wanker

I'm fully with JimX - i think that was a very important thread and some important advice and comments in there and some different perspectives. While there were some negatives, it also shows there isn't room in here for people like that and keeps a lot of the wanna be dickheads off here, and hopefully off buying a skyline.

There was a lot of abuse in there, but quite rightly so.. and also some wise words from all sides of the fence i think. It was one of the best threads on SAU for a long time I thought!

:werd:

I couldn't believe how quickly the thread grew. Plenty of abuse and also plenty of sympathy from those who didn't dislike Denis or hadn't been witness to his ramblings. It DID get out of hand in the end though. Perhaps a better option would have been just to lock the thread as is usually done...

Did anybody save any of the pics he took? If you could post them here, it would be much appreciated. I have a shrine to our long lost skylines...

AutoTrust Mentor

AutoTrust

Posted
Posted

Well, I didn't even get a chance to post a reply because entire pages were appearing before I had finished reading the previous, I always read entire threads before posting and the sucker was gone before I got the chance. There will always be people who speak before they think as there will always be kids that get gtr's for free. Mines-Datsun needs to do alot of growing up and deserved every bit of flamage as a result of his childish rantings. The original thread should be made accsessable and locked for the benefit of others, and should be located in a new section called Rampant Stupidity. I have done some very dangerous and stupid things when I was younger and accepted the resultant flamage from my elders and peers at the time. had forums of this nature been available at the time I would not have posted such misadventures, and if I had I would have deleted it too and never returned. But that's me. :)

Shell Grand Master

Shell

Posted
Posted

guys - forum members have always been able to delete their own threads....it's the way the software has always worked...

if one of the mods had deleted it, then maybe we'd consider bringing it back and locking it, but since minesdatsun did it, well - it's his right to do so.

most regulars on here have long memories...i sure most of us know who's a knob and who isn't ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      Automatic Power Button Light Flashing

      By dbm7 · Posted

      Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Duncan
      R34 Plug Identification

      By Duncan · Posted

      Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • joshuaho96
      Automatic Power Button Light Flashing

      By joshuaho96 · Posted

      Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • BOLGE
      R34 Plug Identification

      By BOLGE · Posted

      Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...