Jump to content
SAU Community

Recommended Posts

The EDGE CINEMA > What's happening?

Warning Horn = Enter the Cinema from 1pm because the introductory trailer starts now at 1.15pm due to prizegiving at the end > vacate by 3.57pm

* Top Secret Imports will be there from 8.30am with R32s, R35 etc

* Just Jap will be there from 11am with R32 & R35 + Merchandise

* TSI and JJ cars will be parked in the foyer and along the concourse in front of the theatre glass facade

* When you arrive in groups, the Group #1 R32s can park along the eastern retaining wall. We'll remove 'Caution' tape as you come in.

* Any remaining tourist buses are to be gone by 12.05pm

* You'll be greeted by TSI, JJ and a disk jockey with music.

* If fine, Kory and Matt and Eric are at your service to do a professional photoshoot of your car.

* Cinema Tickets can still be bought at the NISSAN desk at the Entrance to Cinema #1 inside. * Do NOT buy tickets from the Edge.

* Food:- Extra pies will be on offer at the coffee kiosk inside.

* Group #2 R33s can park in remaining spots on the upper carpark (at ground level)

* Group #3/4 cars of all sorts will be ushered down to the lower carpark > an elevator will take you up to ground level

* CCTV will be on with theatre staff monitoring. Theatre staff will also be circulating throughout both carparks every few minutes according to time clock.

* SAU Organisers will also be going out randomly to check on cars

* Dignitaries include Terry Ashwood, Rod Markham, Garry and Jack from TSI, Steve and Darron from J-J, Jason Round from P.I., Tom Hall from Fast Fours.

* The elected SAU-NSW Execs Steve-O (Pres), Matt (V-P), Shell (Sec) and Duncan (Treas) will be present along with Nick at the SAU/Merchandise desk. SAY HELLO!

* Have a squizz at all the cars and TSI and J-J displays and SAU Merchandise, Membership forms and flyers until 1pm > when you'll enter Cinema #1

* The 1st introduction clip at 1.15pm will include the kosher parts of the R34 GT-R 10th Anniv from last year as hosted by most of the current group + SAU promos.

* The main feature will begin at 1.23pm = Highlights of the 1992 Bathurst 1000 (compliments of Chevron/Channel 7) which lasts for 2 hours.

* Prizegiving will be straight after the feature at 3.30pm, mainly centred around the front right hand side of the theatre (as you look at the screen).

  • Replies 311
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Leaving for Sydney now to get closer for tomorrow. Just gave the car a quick wash, so hopefully no rain!

BTW - if anyone is interested it's for sale and inspections on the day are welcome...

See you all there... :P

Also as someone who grew up in the mountains I know Sunday arvos can be a pain going East, + Bathurst weekend + roadworks. Won't be so bad with some company in the car and some music. But you can also consider hanging around Katoomba until after about 8-9pm; there are tons of nice places to eat around Katoomba / Leura like the Carrington (Katoomba St nr station), Canton Palace (246 Katoomba St), and so on.

Wall St Money Never Sleeps is also playing at the Edge at 5.40pm / The Other Guys at 5.30pm on the day, together with a bunch of other movies (with sessions on at 7pm, 8pm, 9pm) so that's another option for delaying your trip home if that's something you can afford to do. ;)

Session times at http://www.edgecinema.com.au/Movies/tabid/54/Default.aspx

Cheers,

Matt

Wall street 2 is an awesome movie.

Well worth the watch.

I'll be out of there to watch F1 once the movie ends

and with everyone washing thier cars, i think the law of rain is going to be in full effect.

but, hopefully not

+1 LOL

Still haven't washed mine yet, will do it soon though!

Misfire problem is all fixed! And the car has been lowered a bit more ;)

Everything sorted with car...

Found to be dead alternator as te battery is not charging judt discharging whilst running!!!

Spewing as i cant make it out in the GTR.

Definately up for the next cruise tho so speeing about this missed opportunity.

Heres a few pics of my R32 GTR

6bc22036.jpg

191af2a9.jpg

I'll be heading back home along the bells line. Sure it's an extra 100km but It's sure to be quicker than heading down the mountain after bathurst. If people are leaving when we head out tag alongs are welcome ;)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...