Jump to content
SAU Community

How To Remove This?

SiNNO

By SiNNO,
in General Maintenance

 Share

Recommended Posts

SiNNO Experienced

SiNNO

Posted
Posted

Hey guys,

I'm in the middle of changing my spark plugs on my rb25de.

Anyone got any ideas I can try to take this rubber tube off? I already removed the clamps and used brute force but the thing won't budge.

It's the last thing I need to remove to be able to get to the coil pack cover :blink:

14062010495.jpg

Link to comment
https://www.sau.com.au/forums/topic/325007-how-to-remove-this/
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

these....are one of the essential tools for a skyline owner!

vh479.jpg

if not....you need to break the seal between the hose and the metal.

carefully work the smallest bladed screwdriver you have between the hose and the pipe (don't stab the rubber, go under it). if you can work the screwdriver right around the pipe the hose will come straight off.

Victory Mentor

Victory

Posted
Posted

Another good trick is once you have the tip of the screw driver under the rubber and can prise it up spray some WD40 into the opening. This will help to soften the hose and allow you to get the screw driver in further to brake the seal between the hose and the pipe.

I would not put hot water anywhere near this area as it would run down over the coilpacks and the spark plugs.

tiberis Enthusiast

tiberis

Posted
Posted

give it a twist.

seriously, it's the same theory as the other techniques, you just need to break the bond between rubber and metal, sometimes rotating the hose helps break the contact first, then you just pull.

might be a bit hard if the hose is really stiff, but it's helped me many times over the years.

plus it also helps for putting hoses on.

Craved Grand Master

Craved

Posted
Posted
  Duncan said:
these....are one of the essential tools for a skyline owner!

vh479.jpg

if not....you need to break the seal between the hose and the metal.

carefully work the smallest bladed screwdriver you have between the hose and the pipe (don't stab the rubber, go under it). if you can work the screwdriver right around the pipe the hose will come straight off.

i have these - these are awesome

Munkyb0y Grand Master

Munkyb0y

Posted
Posted (edited)
  mad082 said:
+1 for giving it a twist, or getting some of those hose pliers. or get the biggest flat screwdriver you have and wedge it between the steel piece and the hose and try and lever it off (basically how the hose pliers would work)

this is the way i always deal with stuck hoses.

Edited by Munkyb0y
89CAL Grand Master

89CAL

Posted
Posted

thanks mate, i need a fitting like that... if u can see in my sig photo, the rocker cover fitting on my rocker cover points upwards as they do standard and it makes my setup look a bit average.

Dont suppose anyone has one they want to sell to me?

ARTZ Grand Master

ARTZ

Posted
Posted
  Victory said:
Another good trick is once you have the tip of the screw driver under the rubber and can prise it up spray some WD40 into the opening. This will help to soften the hose and allow you to get the screw driver in further to brake the seal between the hose and the pipe.

I would not put hot water anywhere near this area as it would run down over the coilpacks and the spark plugs.

So how do you wash your engine...? I use a hose...

  Duncan said:
hose pliers! and they have saved my knuckles more damage than any other tool I own

i really need to start that...."cool tools for skylines thread"....there's more where they came from!

+1 for cool tools thread..Its a great idea... :D

  SiNNO said:
Got the hose off using a hair dryer, worked like a charm :(

Would've used hose pliers but couldn't find any today. :(

Bunnings and Supercheap didn't have them

I also tried to buy some today ,bursons said no...:(

I was using a hair dryer to dry paint the other day when i thought of it. .Hadnt actually tried it yet but glad it worked for you..

GF knows if she cant find her hair dryer its usually in the shed...lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • MBS206
      What should I do next to hold the head on

      By MBS206 · Posted

      When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

    • Rezz
      Chris' Toyota Mark ii JZX110

      By Rezz · Posted

      Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...