Jump to content
SAU Community

Recommended Posts

Hey guys.

My M35 seems to be farting when under full boost at around 3-4000rpm. I remember reading about people saying it was either an exhaust leak or an issue with the BOV.

Has anyone found a fix for the farting? I remember reading about someone ordering a new BOV but never heard the outcome..

I was wondering if a stock R32/33/34 GT-R BOV would bolt strait on as a replacement of the stock BOV?

Cheers! icon_e_smile.gif

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/
Share on other sites

Hey guys.

My M35 seems to be farting when under full boost at around 3-4000rpm. I remember reading about people saying it was either an exhaust leak or an issue with the BOV.

Has anyone found a fix for the farting? I remember reading about someone ordering a new BOV but never heard the outcome..

I was wondering if a stock R32/33/34 GT-R BOV would bolt strait on as a replacement of the stock BOV?

Cheers! icon_e_smile.gif

Hey Chris,

I would doubt compatibility of any R Skyline BOV due to the VQ engine. I could be incorrect but I doubt they would be a straight bolt on.

I was looking into a TurboSmart Dual Port BOV but I've put it off until the ECU's are remappable and the highflow turbo project get's underway.

I'm trying to think off the top of my head who may have done an M35 BOV replacement and the only one I can think of has sold his Stagea and downgraded to a Lexus or something like that LOL

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/#findComment-5333493
Share on other sites

I can't confirm 100% but I was just reading something on Turbosmart and it may be fact that the Dual Port will NOT fit the vq25det with the trumpet fitted, so either drop the trumpet or opt for the Kompact Dual Port.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/#findComment-5333733
Share on other sites

Hey guys.

My M35 seems to be farting when under full boost at around 3-4000rpm. I remember reading about people saying it was either an exhaust leak or an issue with the BOV.

Has anyone found a fix for the farting? I remember reading about someone ordering a new BOV but never heard the outcome..

I was wondering if a stock R32/33/34 GT-R BOV would bolt strait on as a replacement of the stock BOV?

Cheers! icon_e_smile.gif

Hey that was me with the farting stagea,

I was told it was most likely an issue with the bov, I've ordered a new Nissan one ($250) and was going get it fitted this week...... until the top tank on my radiator split.....

So once I get my car back and get the BOV fitted I'll let you know. It's been a pretty long process and I'm hoping to get it all sorted before I drive to QLD at the end of the month.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/#findComment-5334151
Share on other sites

I doubt it will be the bov, more chance one of the cooler hoses has split or the exhaust manifold is leaking.

+1 :laugh:

Chris, if you really want to go with an aftermarket BOV, perhaps look at the Greddy RZ unit?

It can be used either venting to atmosphere :laugh: or plumb back :laugh: and is good for up to a claimed 400hp.

If you plan to go with more power, perhaps the HKS SSQV unit?

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/#findComment-5334930
Share on other sites

I don't see how it's the BOV. They are closed under pressure when they aren't operating so how can they leak!? Doesn't really make sense that it can be doing the exact opposite of its intended purpose even without a spring at all the pressure would still keep it closed under power.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/#findComment-5335060
Share on other sites

Hey that was me with the farting stagea,

I was told it was most likely an issue with the bov, I've ordered a new Nissan one ($250) and was going get it fitted this week...... until the top tank on my radiator split.....

So once I get my car back and get the BOV fitted I'll let you know. It's been a pretty long process and I'm hoping to get it all sorted before I drive to QLD at the end of the month.

Cheers.

Let me know how you end up going!

+1 :D

Chris, if you really want to go with an aftermarket BOV, perhaps look at the Greddy RZ unit?

It can be used either venting to atmosphere :) or plumb back :) and is good for up to a claimed 400hp.

If you plan to go with more power, perhaps the HKS SSQV unit?

I will look further into it. Cheers.

I don't see how it's the BOV. They are closed under pressure when they aren't operating so how can they leak!? Doesn't really make sense that it can be doing the exact opposite of its intended purpose even without a spring at all the pressure would still keep it closed under power.

It seems to make the farting noise once I am on peak boost and then lift off the throttle or once it shifts. I can keep the farting going if I feather the throttle... So I was thinking its either the exhaust or BOV.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/#findComment-5335584
Share on other sites

I just rang Turbosmart to get the low-down on what the most suitable BOV is for the M35.

The Kompact Plumb Back - Nissan (TS-0203-1226) is suitable for the stock ceramic turbo and for a GCG Highflow PROVIDING you don't turn up the boost. So that is pretty much a no go for those who wish to dial up the power output in regards to PSI.

The best option for a higher PSI is the Nissan Dual Port (TS-0205-1026), as mentioned earlier you cannot run the trumpet due to the restricted space, it is recommended you don't have the trumpet on and block the outlet (Turbosmart have a Port Blanking Plug that does the job). The unit would have to operate as 100% Plumb Back (which was what I'm after anyway).

I've just had a quick look on the net and the pricing is around $460.00 for the Nissan Dual Port.

If anyone can offer any feedback on the Nissan Dual Port please do :)

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/#findComment-5335655
Share on other sites

When they say don't turn up the boost, do they realise we run 1 bar stock? Stock bov is running strong on mine, over 6 months of hard 20psi driving.

They were surprised when I told them what the stock turbo puts out, as soon as I said I would be looking to tune to about 18 - 20psi they stated the kompact unit wouldn't be suitable.

I probably would've gone for the bigger unit anyway but I just wanted to suss it out.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/#findComment-5335734
Share on other sites

I wonder if the "farting" sound you mention. does it come from over near the passenger side?

I wondering if it is the Wastegate on the turbo blowing open?

I have had it open at times on peak boost (but on mie it was getting suck open until I swapped the solenoid out) and it sounds like a farting noise and boost is limited to 9psi when it does this.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/#findComment-5336016
Share on other sites

Mine makes the farting noise occasionally, but not very often. What I have noticed is that there is no change in the boost guage when it does happen - which to me would indicate its not a cooler clamp, or BOV but more likely manifold or exhaust...?

Either way its the same sound as in spoolin's car as I have been car for the same noise.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/#findComment-5336242
Share on other sites

Here is what I have found;

I blocked off the BOV with some rubber and went for a 45min drive to try and make it 'fart'. No farting at all. I get back home and return the BOV to stock - took it for another drive and it farts again.

Here is a quick iPhone recording HERE listen at 15seconds.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/#findComment-5337413
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...