Jump to content
SAU Community

Recommended Posts

So my R34 GTR with GTSS', poncams/gears, Z32s, pfc, HKS/Nismo dumps-pipes-zorst, bigger cooler, hard pipes, profec, splitfires, etc. made a poor 290awkw with some serious boost issues. Big plug to Unigroup who seem to have sorted the boost issues that i struggled to find on my own...

Now i am up for a decent retune and am seriously considering jumping on the E85 bandwagon, since there are some good supporting mods to start with. My fuel setup is all Nismo, including intank pump, 600cc inj's, and reg. I was thinking bout upgrading to 1000cc ID's, running E85, 22psi+, and aiming for mid 300's at the wheels.

What do you guys think of running the Nismo intank with 1000cc ID's to support the power level, and also doing it on standard bottom end?

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/
Share on other sites

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Id be getting a small undercar surge tank and one 044 pump or similar should do the trick for that power level..Only cost about 300$ too, cheap for peace of mind..

If you get the latest PI magazine theres a story on it, and a free dvd... :D

Edited by Arthur T3
Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394509
Share on other sites

Id be getting a small undercar surge tank and one 044 pump or similar should do the trick for that power level..Only cost about 300$ too, cheap for peace of mind..

If you get the latest PI magazine theres a story on it, and a free dvd... :D

If we're talking only one 044 pump, wouldn't the Nismo pump be close in flow rate comparison?

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394524
Share on other sites

i cant see why you cant make 300-330ish with the setup you have on just 98.... is the extra 20-30kw really worth screwing round buying e85 all the time? Unless its at a servo near you... or the car is track only....

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394553
Share on other sites

i cant see why you cant make 300-330ish with the setup you have on just 98.... is the extra 20-30kw really worth screwing round buying e85 all the time? Unless its at a servo near you... or the car is track only....

In the perfect world it would make 330awkw, esp with all the brand name bits on it... It only made 290 and drove like a pig, although the old tuner was clueless and ignored the boost issues too. Just want to make sure it reaches its potential, and the possibility of it exceeding expectations and making something silly like 370+ would be insane!!

Servo in the next suburb is selling E85 as of next month.

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394577
Share on other sites

Sard 700's (or the 800s) would be fine for that power. Minor rail bump if anything.

I think Nismo have 740s for RB26's as well?

Nismo pump flows fine for 400rwkw on PULP/700cc + a minor bump (circuit cars, no surge tanks in them)...

So E85 @ roughly 360rwkw would be similar in terms of volume/supply

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394579
Share on other sites

In the perfect world it would make 330awkw, esp with all the brand name bits on it... It only made 290 and drove like a pig, although the old tuner was clueless and ignored the boost issues too. Just want to make sure it reaches its potential, and the possibility of it exceeding expectations and making something silly like 370+ would be insane!!

Servo in the next suburb is selling E85 as of next month.

Most you'll get is around 30-40rwkw gain from E85, going by what most other results indicate at least anyway :D

So 370 would look like the limit (in theory).

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394585
Share on other sites

In the perfect world it would make 330awkw, esp with all the brand name bits on it... It only made 290 and drove like a pig, although the old tuner was clueless and ignored the boost issues too. Just want to make sure it reaches its potential, and the possibility of it exceeding expectations and making something silly like 370+ would be insane!!

Servo in the next suburb is selling E85 as of next month.

Your lucky man, i gotta drive 1.5hours into the city to get E85. But im pritty sure holden realised some Eco crap last week that runs on E85 so hopefully it comes more avaible.

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394592
Share on other sites

You could always put a big single in tank like an A1000 for that power it shouldnt be stressed and then no extra lines and tanks etc

Thats an 800$ pump, for that you get 2 44s and a surge tank...

Maybe I just like surge tanks, but thats how i was going to set mine up anyway..

You dont think its worth it?

:D neither does nismoid.....

Edited by Arthur T3
Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394598
Share on other sites

In the perfect world it would make 330awkw, esp with all the brand name bits on it... It only made 290 and drove like a pig, although the old tuner was clueless and ignored the boost issues too. Just want to make sure it reaches its potential, and the possibility of it exceeding expectations and making something silly like 370+ would be insane!!

Servo in the next suburb is selling E85 as of next month.

By any chance do you get your car serviced at Autostyle? I sort of recognise the plates

Most people will say you need an extra 30% for E85, thats not always the case, my car proved it was way more than 30% under full throttle, but then again every setup is different :D

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394617
Share on other sites

^ depends on how efficient the setup is and all the usual variables that come into account :D

Some cars respond much better to fuel and all of a sudden you can get heaps more out of it, same token fuel use then is higher also.

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394625
Share on other sites

Here is the link to Caltex planned rollout of E85:

http://www.caltex.com.au/ProductsAndServic...s/BioFuels.aspx

Marketing manager told me plan is have most running by late September, early October. So that might make it easier for some.

Engine bay looks almost stock, i don't want the look of pumps, lines, surge tanks in the boot.

The 740's are side feed Ash. From what you describe pump maybe close to a dangerous limit there.

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394632
Share on other sites

Here is the link to Caltex planned rollout of E85:

http://www.caltex.com.au/ProductsAndServic...s/BioFuels.aspx

Marketing manager told me plan is have most running by late September, early October. So that might make it easier for some.

Engine bay looks almost stock, i don't want the look of pumps, lines, surge tanks in the boot.

The 740's are side feed Ash. From what you describe pump maybe close to a dangerous limit there.

Thats why i said undercar tank...can get one that holds 2 44s..bolts up under the boot floor

135$ on ebay.. ..

http://cgi.ebay.com.au/Fuel-Surge-Tank-Und...=item3356ba225b

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394651
Share on other sites

In the perfect world it would make 330awkw, esp with all the brand name bits on it... It only made 290 and drove like a pig, although the old tuner was clueless and ignored the boost issues too. Just want to make sure it reaches its potential, and the possibility of it exceeding expectations and making something silly like 370+ would be insane!!

Servo in the next suburb is selling E85 as of next month.

You mentioned unigroup fixed your boost issues, what sort of power is it making now?

The car should be making in the region of 320-330awkw with the hardware you have currently, and if not, somethings not right and I would be addressing that before trying to chase more power through switching to E85.

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394652
Share on other sites

You mentioned unigroup fixed your boost issues, what sort of power is it making now?

The car should be making in the region of 320-330awkw with the hardware you have currently, and if not, somethings not right and I would be addressing that before trying to chase more power through switching to E85.

Haven't been back on the dyno, currently sitting outside holding off for a week to decide whether or not to go E85.

Link to comment
https://www.sau.com.au/forums/topic/332614-e85-fuel-setup/#findComment-5394659
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...