Jump to content
SAU Community

Recommended Posts

Hey everyone, just last week I came up to an oportunity and I couldn't resist

So I bought a 1998 r33 gtr :)

Mods

Catback exhaust 3.5inch( need custom dumps for new turbo)

Hks pods

Power fc not installed

I got it pretty cheap so I didn't check it much as long as the bodys straight witch it is because looking to rebuild in the near future,

As being a rb25 boy for 4 years not sure how much the rb26 can take and what would be a good setup.

Any way I took off the front bar , front mount etc to find out heaps and heaps of blow by and stops just after the bovs . So turbo oil seals are gone skies.

So I've got around 5-6 k to spend and buy some goodies :)

Already have power fc with hand controller

I want to keep the twin setup and don't want anything monstrous that will kill my motor or anything.

Hopefully I can reach round the 300kw mark :)

What would the best set up be for my budget?

Some one point me in the right direction !!!

Link to comment
https://www.sau.com.au/forums/topic/334414-just-bought-a-gtr/
Share on other sites

Lots of oil around doesnt mean much TBH. Could simply just be normal blowby, car is 10years old etc, so buildup wouldnt surprise me.

Suspension, full oil changes (diff, transfer case, gearbox etc) service, brakes, PowerFC tune etc IMO.

All belts and the like is where you should spend the money IMO.

Otherwise...

Turbos will be 2500-3000

AFM - 650

Injectors - 800

Labour - 1000

clutch - 1500

So already blown your budget and you still have a car:

1. doesnt handle as well

2. isn't fully reliable by any means of the word.

All of a sudden you've spend near 10k when stuff starts letting go.

Get it all in good condition first, then chase the power.

yeah bro, defiantely start with a nice clean up of the shit first and a catch can. get the pfc in and c where u are from there.

i dont think 300 kw is a good target really in terms of the money u would be spending id be going more for the 380ish mark if u only wanted 300 u should have kept what eva rb25 powered car u had before

As everyone said, if you're not looking at spending huge amount of money, stick with 300awkw as a target. Even that will cost.

The next GTR I get will definitely be one thats got work done or one that is similiar to the N1 (maybe a NUR? hahaha). Cost breakdown as per below (all brand new parts);

1) Catback Exhaust = $1400

2) Dump Pipes = $500 (probably dont have to change if you've got a 34GTR but normally 32/33 will change them when doing turbos)

3) Turbo = $3000

4) ECU = $1400

5) Oil Cooler = $500

6) Clutch = $2500 (I would only like a Nismo Super Coppermix Twin personally but could be way cheaper if you go exedy or npc)

7) Boost Controller = $600

8) Tuning + Installation of ECU/Boost Controller = $1000

9) Metal Hi-Flow Cat = $350

10) Adjustable Coilovers = $1500

11) Labour = $2000

Thats almost $15,000 worth of mods and I would consider these to be basic essential GTR mods for you to enjoy the car's potential. By this time, your car would be very realiable at anywhere between 250awkw-300awkw (depending on your tune etc). If you want dead set 300awkw or slightly above, you'll need fuel system upgrade too and below are some extra cost.

12) Injectors = $1000

13) Fuel Pump = $350

14) Assuming you do not have AFM or else another, AFM = 700

Bare in mind, these will not be the end if you bought a dead stock GTR because you will want to change the rims, brake pads, rotors etc at some stage and the cost just keeps going up. Thats assuming the engine is still running good.

Upgrading the oil pump would be preferred but its a BIG job so not a lot of people would do it. Also if you're doing major service, maybe chuck in the N1 water pump because they've got lesser blades.

Just got it devices with royal pulple 10w-40 k and n oil filter new fuel filter cleaned out all the oily shut in the intake , took the intake manifold off cleaned everything :) I got a cusco catch can not sure how to hook it up my mechanic said don't use that one but I don't see why not? Just the silver one with the blue fitings but hasn't got a breather in it.. Do I need one ?

And another thing the bovs seem fine but it's doesing like a mutherf**ka I Gota look turbo side and see if the recirculating pipe are blocked...

Cheers for all the adivce guys I'll let you know what happins after the tune :P

Keep the discussion going!

i dunno much about the gtrs mate but with the catch can

you want to run the line that goes back to the intake into one side of your catch can then run the other to the intake

so the blow by goes through the catch can on the way to the intake

you can put some steel wool in there too to catch the vapour too (make sure no small bits are gonna come off tho

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...