Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just noticed a spot on the car which looks like little bubbles and are kind of sticking out creating a rough surface.... I assume this is rust... It is just to the left of the rear quarter window and its doing my head in!

Is this common? Anyone else had the same problem? And how can i get it off !

Link to comment
https://www.sau.com.au/forums/topic/336741-rust/
Share on other sites

Ok good to see someone has also experienced it in the same place... now HOW do i get rid of it?? and just how quick will it spread if i dont get to it? Well how long do i have until it wrecks the car pretty much is what i am asking...

Any advise appreciated !

Link to comment
https://www.sau.com.au/forums/topic/336741-rust/#findComment-5446080
Share on other sites

go to a panel beater. the actual amount of rust will be much larger than what is visible. a panel beater will be able to remove the rust (grind it back to where it is metal), and if it has penetrated all the way through the metal then you can have the hole welded up. if it is too big then they will cut a section out and weld a new piece in.

i recently had two bubbles of rust removed from around the rear window of the missus pulsar. this is what they did. this is also the only way to get rid of the rust.

Link to comment
https://www.sau.com.au/forums/topic/336741-rust/#findComment-5446203
Share on other sites

go to a panel beater. the actual amount of rust will be much larger than what is visible. a panel beater will be able to remove the rust (grind it back to where it is metal), and if it has penetrated all the way through the metal then you can have the hole welded up. if it is too big then they will cut a section out and weld a new piece in.

^^^ And go over the car with that panelbeater to check over other spots. Once rectified, you can rest easy.

Next time you buy a 'Line, get VINs Fasted to check on which Japanese Prefecture the car came from. North Honshu & Hokkaido = salt!

Link to comment
https://www.sau.com.au/forums/topic/336741-rust/#findComment-5447884
Share on other sites

  • 3 weeks later...

rust:

rear wheel wells

inside car forward of seats in sills. happens when the car is jacked up wrong- fix is new sills in/out affects BOTH sides

C Pillar towards rear of car where glass meets body - BOTH SIDES

rear panel under tail lights and licence plate area - more so if its had a tap.

chassis rails - especially if they are crushed.

Roof around sunroof area

thats most of mine.

the minor rust can be cut out and fixed - any competent panel shop can do that with a grinder and brass.

the major stuff - new parts.

Link to comment
https://www.sau.com.au/forums/topic/336741-rust/#findComment-5483039
Share on other sites

^^^ And go over the car with that panelbeater to check over other spots. Once rectified, you can rest easy.

Next time you buy a 'Line, get VINs Fasted to check on which Japanese Prefecture the car came from. North Honshu & Hokkaido = salt!

+1!!

Link to comment
https://www.sau.com.au/forums/topic/336741-rust/#findComment-5483043
Share on other sites

the reason why you have rust in certain window, boot and seam areas is because they use a sealant to stop water getting in, as it brakes down in the years water will stay there work its ways though the paint and primer and cause rust.

so in conclusion pending on age and last time it was applied reseal all these areas if you dont want water build up causing rust

Link to comment
https://www.sau.com.au/forums/topic/336741-rust/#findComment-5483094
Share on other sites

^^^ And go over the car with that panelbeater to check over other spots. Once rectified, you can rest easy.

Next time you buy a 'Line, get VINs Fasted to check on which Japanese Prefecture the car came from. North Honshu & Hokkaido = salt!

Bit of a misconception that its just Northern Honshu & Hokkaido is only place for salt.

They pretty much spray salt on highways over winter in Kanto, Chubu,Kansai regions but definitely its for a longer period in Hokkaido & Tohoku.

The thing you do get down Honshu is rust from coastal areas.

Link to comment
https://www.sau.com.au/forums/topic/336741-rust/#findComment-5483116
Share on other sites

Bit of a misconception that its just Northern Honshu & Hokkaido is only place for salt.

They pretty much spray salt on highways over winter in Kanto, Chubu,Kansai regions but definitely its for a longer period in Hokkaido & Tohoku.

The thing you do get down Honshu is rust from coastal areas.

Thanks Mark, for upgrading my knowledge. :ermm:

Link to comment
https://www.sau.com.au/forums/topic/336741-rust/#findComment-5485919
Share on other sites

  • 5 months later...

panels are $800+ a side and then labour/paint. if you can't do it your self expect a 4 figure repair bill.

I am in process of doing mine and that is :

roof ($700)

rear drivers quarter : $800+

sills $1k set

inner B-C brace $300

rear beaver panel $300.

that is PARTS ONLY. I'm doing the removal myself.

should give you an idea.

Link to comment
https://www.sau.com.au/forums/topic/336741-rust/#findComment-5738701
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...