Jump to content
SAU Community

Recommended Posts

Staggered fitment 8.5in front and 10in rears may cause problems for your Attessa. Can you fit 20 x 10in inside your guards? Yes you will need tyres that big and they will not be cheap.

i dont konw think i will have to see if i can have a test fit somewere ? for the attessa do they have to be the same

Link to comment
https://www.sau.com.au/forums/topic/337004-wheels-20/#findComment-5449281
Share on other sites

i dont konw think i will have to see if i can have a test fit somewere ? for the attessa do they have to be the same

Yes, same width/rotating mass front and rear or attessa throws a hissy fit.

20x10 should fit, just go to your local mag dealer and say you're interested and they will test fit some on your car to give you an idea.

Link to comment
https://www.sau.com.au/forums/topic/337004-wheels-20/#findComment-5449288
Share on other sites

Fronts will fit fine, but your rears will stick out the guards at 10" +35 offset. For the rears you will need +45 for a perfect fitment - I tried 8.5" up front with 10" on the rear on my M35 but my attessa went nuts, now I have 8.5 all round with the correct offsets and no problems.

The ideal size is 9.5 with a +35 offset all round.

Link to comment
https://www.sau.com.au/forums/topic/337004-wheels-20/#findComment-5449305
Share on other sites

Yeah im coming across the same problem shopping for 19's .. saw these nismo 5 spokes but they aint cheap $3500 a set discounted $900.

http://www.importmonster.com.au/shop/produ...roducts_id=1046

tossing up whether to get them or not..but theyd look shit hot on my silver m35 :)

Link to comment
https://www.sau.com.au/forums/topic/337004-wheels-20/#findComment-5453372
Share on other sites

bah dead link, and havent been able to edit for months.. in fact if i have to post i have to log out first for any browser or machine. forum has shocking coding.

http://www.importmonster.com.au/shop/produ...roducts_id=1046

Link to comment
https://www.sau.com.au/forums/topic/337004-wheels-20/#findComment-5453376
Share on other sites

I dunno about the 2% range for difference in circum. At least not with the M35's atessa. I had no probs with staggered on my C34 or R32 but for some reason the same doesnt work on my M35. Had nothing but probs with staggered wheels. It might have just been my car, but I have read similar problems from other M35 owners...

Link to comment
https://www.sau.com.au/forums/topic/337004-wheels-20/#findComment-5454163
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...