Jump to content
SAU Community

Recommended Posts

Beer Baron, I didnt think they would cost that much. My budget is around the $65k mark, although for something as clean as the first one I could maybe budge a little. Dont think I could justify spending that much on a GTR. Do you know any other sites to visit where I can find some nice cars for import?

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Todd and Yumi (Edit* via Kristian) have a nice VS I (not VS II though, that you were asking about), coming in next month + warranty.

From Nara prefecture, no rust, no damage, modified 550ps, white, full service history.

With RAWS requiring virtually stock standard cars to be signed off, how does one get these more modified examples through without major time invested (assuming you can source stock parts).

Someone somewhere is fudging something!

IMO, a modded car ex Japland may appear value, but certainly not if you need to go to hell and back to have it complied correctly, as a friend who recently bought a 34R in and had to swap out (and find first!) a standard 34R dash because his had gauges inset into it. The cost of such works ads up quite quickly..... and you still haven't seen or driven it to actually know if its a good one!? lol

^^^^get a load of THIS guy!

haha nah just tricking...

it's a bit of a catch22 (i think that's the saying?)

cars have to be brought back to standard for compliance...

...yes and "no"

yes - it is a federal requirement to return the cars back to stock for compliance, however once the car "passes" compliance - it gets very hard to "chase it up" for the authorities...

so in a sense... the most viable time that authorities can "police" the RAWS (not revs - revs = pre 2005) the RAWS is BEFORE compliance is passed..

while it's in their shop...

crazy, right? any worker with half a brain would say so what, it's a work in progress.

i mean to say no modified cars can be imported.. is a load of pap.

im sure someone's going to get up me for saying this - but it's entirely up to the RAWS owner and how much money they want to make off their customer.

the RAWS owner is the one that "passes it"

there is no "government inspector" that comes down to the shop n check every car that goes through...

they are bestowed delegated authority to make the call themselves.

the onus is on them and them only to say "yeah okay" or "naaaaaah think i might need to take the bodykit off aye, yeeeeeaaaah gunna be 3 days labour for that aye"

they can "pass" it in whatever form they deem necessary. the only reason that they would make someone install a dash is because they RAWS owner feels like getting his wife a new flatscreen TV. and has to find a way to pay for it.

they can comply it "modified" and nobody would be any the wiser - if authorities come back to him for mods, he can simply push the blame onto the owner of the car n say "wasn't me"

the way they make the customer cough up the cash is...

usually they do the work before they ask.

and when you blast them for your 4 grand invoice - they often give you a ten minute rant about "litigation" and "sueing" and "malpractice" and try to pretend like they know what they're talking about. this intimidates the customer. and they pay it.

forgive the rant. i know it has nothing to do with GTR's... but to say that only "non modded" cars can come in is a load of scat. it is a rule that can't REALLY be policed and is perpetuated by whoever wants to perpetuate it... which is usually those who have something to gain from "returning a car to stock"

on topic - importing a GTR won't necessarilly save you money... but it MAY mean you'll get a nicer car... you never know - there are enthusiasts who DONT thrash their car in every walk of life.

take my soarer for instance, cost me a lot more to import. but the money isn't an issue when you get a mint car with service history and millions of yen worth of name brand mods :)

Edited by Mr Eps

it actually can be policed very easily. say a compliance shop gets a modified car and the customer begs them not to return it to standard as they can't afford it. workshop says ok, they then submit the car to DOTARS online as complied, at this point the car is supposed to be completed and awaiting it's compliance plate to arrive at the workshop. this is the point at which DOTARS will initiate a spot check and they give only 24hrs notice. so no a workshop cannot say 'it's a work in progress' as they have already submitted the car as completed. so if DOTARS arrive to find it not as it's supposed to be it's a big problem for any workshop that would do that. this is why most (should be all) workshops will insist on returning vehicles to standard as it's their business at risk. I would strongly suggest anyone wanting to import a modified car talk to you compliance workshop BEFORE you buy it and ask them what exactly will be involved and what kind of costs you are looking at. that way you can decide up front if it's viable or not. :)

^^^ it seems i was misfed information in the rant i got given!

that makes a lot more sense what you said... when i was being told it i was like "that makes no sense"

but yes - that's sterling advice :)

it actually can be policed very easily. say a compliance shop gets a modified car and the customer begs them not to return it to standard as they can't afford it. workshop says ok, they then submit the car to DOTARS online as complied, at this point the car is supposed to be completed and awaiting it's compliance plate to arrive at the workshop. this is the point at which DOTARS will initiate a spot check and they give only 24hrs notice. so no a workshop cannot say 'it's a work in progress' as they have already submitted the car as completed. so if DOTARS arrive to find it not as it's supposed to be it's a big problem for any workshop that would do that. this is why most (should be all) workshops will insist on returning vehicles to standard as it's their business at risk. I would strongly suggest anyone wanting to import a modified car talk to you compliance workshop BEFORE you buy it and ask them what exactly will be involved and what kind of costs you are looking at. that way you can decide up front if it's viable or not. :)

^^^ this man..

speaketh the trooth... :P

marlin,

I know the car you are talking about as well. it was me that pulled the dash on it well after the RAW did it.

i'm pretty sure they /have/ to give you SOME form of notice...

..not trying to sound cocky when i speak like that but im just saying i highly doubt they're allowed to "rock up" like that...?

on every random inspection I have ever had they just rock up with no notice .

on my last sample car the inspector told me an amusing story where they did another sample car inspection , finished a little early , had some time to kill so wen't back to the same workshop to do a random inspection on a different car

surprise!

they do the same here as well. I know of a few shops that before all this came to a head would let me grab a car - do what I needed to (usually an alarm or similar.) and return it to them., now its a entirely differnt matter. they will rock up and inspect at will.

If inspectors are turning up without notice, then I suggest workshops join the RAWS association and kick up a stink about it - inspectors are meant to give 2 days notice if workshops have not had any prior infringements. Even when workshops have been put through the ringer, they should get 2 hours' notice.

cuts both ways I guess, as long as the inspection itself does not impede on the company's ability to continue working then as the autoworx guy says random 'no notice' inspections won't hurt (although it's probably annoying).

If you're being targeted and it interrupts your ability to do your job then that's when a workshop should complain.

we have no problem with them turning up whenever they want as we have nothing to hide .

as a long term member of the raws association I would encourage MORE random inspections with no notice.

Yeah agree with that to a point. Like you say if you're doing the right thing inspections are not a problem. Once a cars submitted it should be all fine so there is no excuse for failing. but some workshops who are space limited will have cars stored at another site etc so it makes sense to give some notice to save wasting dotars time and taxpayers money.

Anyway at least you've proven what I was saying. People think it's a free for all but anyone thinking they can get away with sub par compliance is living on borrowed time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...