Jump to content
SAU Community

Recommended Posts

I saw a Skyline today that had changed the wiring and lens colour so the smaller inner round lights are being used as indicators. What do you guys think? Illegal or not? I didn't really like it, I think it takes it away from the traditional.

Link to comment
https://www.sau.com.au/forums/topic/337107-is-this-illegal/
Share on other sites

if its still as visible as standard, it should be fine.

i rewired my indicators to the parkers in my s14 cuz i didn't like the stock indicators. sure they flash a little faster now but as visible as before.

how much faster? i did this in my 33 and they blink at the normal rate

Link to comment
https://www.sau.com.au/forums/topic/337107-is-this-illegal/#findComment-5451064
Share on other sites

do you know many skylines with "small inner round lights" for headlights Ash? :happy:

v35's, v36's, r35's.

OP, it's perfectly legal as long as:

there is a red reflector facing backwards.

brake light indicators have noticeable difference in intensity between driving and braking in the dark.

there is an indicator signal visible from all angles on the turning side.

Link to comment
https://www.sau.com.au/forums/topic/337107-is-this-illegal/#findComment-5451436
Share on other sites

do you know many skylines with "small inner round lights" for headlights Ash? :)

I think she means the inside pair of tail lights made to flash instead of the actual indicator lights underneath..

Just trying to get it 100% clear :)

It's not legal far as i know given the mods that need to be done for compliance for the taillights so they all come on under the brake pedal/headlights

Link to comment
https://www.sau.com.au/forums/topic/337107-is-this-illegal/#findComment-5451562
Share on other sites

Ive seen some older cars get rid of the indicators all together and the stop light just flashes on one side..definately different

What i wouldnt mind doin is only having one tailight on,the outside one.. then both light up when i brake...reckon its possible?

Link to comment
https://www.sau.com.au/forums/topic/337107-is-this-illegal/#findComment-5452586
Share on other sites

Slinky what model is it? As some are saying a lot of Skylines come with this style of tail light. <3

i rewired my indicators to the parkers in my s14 cuz i didn't like the stock indicators. sure they flash a little faster now but as visible as before.

I had the same deal in my a/m bike indicators... just need to smack a little diode in there :)

Link to comment
https://www.sau.com.au/forums/topic/337107-is-this-illegal/#findComment-5452606
Share on other sites

Hey guys

Sorry Coffee failed me while I was writing this, and I failed at explaining what I meant. I meant the inner break/tail lights. They had changed it so the inner set were indicators.

I've never actually been behind a Skyline when it's breaks/tail lights have been on so I don't know for sure but I believe all 4 illuminate when you break but only the inner set work as tail lights, if that's true then what's the tail lights connected to? a 2 stage brightness on the break lights?

Link to comment
https://www.sau.com.au/forums/topic/337107-is-this-illegal/#findComment-5452694
Share on other sites

R34 Coupes (and GTR) have indicators as the orange 'inner' round light, by design, stock, 100%, etc.

R34 Sedans, the indicator is different, seperated item meaning the "Oo oO" lights are all brake lights.

OP must have a sedan, and just merely saw a R34 coupe for the first time :)

Link to comment
https://www.sau.com.au/forums/topic/337107-is-this-illegal/#findComment-5456101
Share on other sites

ADRs state that indicators must be AMBER (orange) light. Brakes are RED.

Could be confusing for following drivers if a red light starts flashing at them.

Red starts flashing is very confusing as the US has. When you almost parallel and can only see one side of the back, it is impossible to tell if they have put on their indicator (not a common occurance) or they are braking. One brake light out, you may as well give up trying to guess! Easier to tell if the road is quiet as they wouldn't be braking but in traffic, it is a nightmare. They have it on home grown cars as well as Europeans. Amber FTW. :)

Link to comment
https://www.sau.com.au/forums/topic/337107-is-this-illegal/#findComment-5456187
Share on other sites

how much faster? i did this in my 33 and they blink at the normal rate

probably double the standard rate. it's cuz normal indicators are 15w globe, parker globes are 5w.

was a bit of a hack job but it works and im use to the fast speed now.

Link to comment
https://www.sau.com.au/forums/topic/337107-is-this-illegal/#findComment-5457151
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Swapped the injectors around and the misfire followed. I went ahead and ordered the Deatschwerks 550cc injectors and am currently waiting for them to be ship and arrive. In the meantime, I've had my Nistune soldered to the ECU. Tested it, and and tried it out with the software. Everything should be prepared for when the injectors arrive.  
    • Yeah they charge a little extra for mods , last year I noted no mods but I did have an exhaust fitted after that so  better to let them know cause these kinds of things can cause the policy to be void if you ever need to claim.
    • Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
×
×
  • Create New...