Jump to content
SAU Community

Recommended Posts

i think he means if the pump is changed without retune it will affect the afrs due to pressure and flow changes

no it won't, the regulator handles flow/pressure, stock pump or 20x600hp pumps, it is still going to operate exactly the same.

um yes it will and it will change proportionate to the pressure increase.

exactly, it is only the regulator that will have an effect on AFRs

Get a bit of ethanol in that sucker. You got a wideband for it yet? 20% would probably cure it. smile.gif

Or just don't use a shit chipped ECU and tune it properly?

all the backyard tuning in this thread makes baby jesus cry

My thinking on this is all the fresh air letting the engine breath cleaner.

The car in example was tuned with sensor on the dump pipe both on dyno and on road tune.

Far more likely the temp correction isn't good enough and the dyno ramp rate does not match the load curves you get with the gears on the road hence different load cells are hit and different afrs.

Edited by Rolls
Or just don't use a shit chipped ECU and tune it properly?

all the backyard tuning in this thread makes baby jesus cry

the ECU was fully tunable 'at the time' it was tuned. We just don't have the software to use it out here.

But the setup for my car hasn't changed, so the ECU is fine for the current setup.

yeah nothing wrong with the tune midori made for that car. they are one of the top 10 GTR tuning shops in the world no question about it. it's a bit richer than our tuning philosophy perhaps but that's not to say it's wrong. it's not stupid rich either from memory.

there are no hard and fast rules that cover every engine and every set-up. each car needs to be tuned on it's merits.

the ECU was fully tunable 'at the time' it was tuned. We just don't have the software to use it out here.

But the setup for my car hasn't changed, so the ECU is fine for the current setup.

Ah fair enough, I assumed it was an off the shelf chip like those crappy mines ecus.

Ah fair enough, I assumed it was an off the shelf chip like those crappy mines ecus.

no dramas :P i know what you mean though, the off the shelf 'canned' tunes for 'any' application are playing with fire a bit

it's interesting though how different tuning philosophies have developed between Japan and Oz though, maybe slight diff, but different none-the-less

no it won't, the regulator handles flow/pressure, stock pump or 20x600hp pumps, it is still going to operate exactly the same.

in theory yer, but in the real world bigger pumps seam to result in slighty richers cars for some reason. maybe not every pump and every car but i bet if you take a 100% stock 33 and run it on the dyno, then install a 044 or similar and run it again you'll notice a difference in AFR's

Far more likely the temp correction isn't good enough and the dyno ramp rate does not match the load curves you get with the gears on the road hence different load cells are hit and different afrs.

like i said earlier, most of the difference will be from different widebands, most dyno ones are high quality items which would be spot on whereas the innovate hes using have been known to be pretty innacurate at times

like i said earlier, most of the difference will be from different widebands, most dyno ones are high quality items which would be spot on whereas the innovate hes using have been known to be pretty innacurate at times

I assume you are talking from experience as you bag the innovative out fairly regularly. Dont some brand names use the same bosch sensor though?

From the other side of the fence, my innovative has been nothing but accurate, more so than some "dyno ones" that get covered in carbon/dropped each day.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...