Jump to content
SAU Community

Ap Racing Big Front Brake Kit - Sydney

Blitz
 Share

Recommended Posts

Blitz Grand Master

Blitz

Posted
Posted

Hi all,

I have for sale one excellent condition AP Racing Front Brake Kit.

brakekit5.JPG

brakekit3.JPG

This is a complete top shelf straight fit front brake upgrade kit for BNR32/BCNR33, and should also be able to fit all Skylines and S14/S15 etc.

The whole setup is in excellent condition and only 8,000 km's old, and includes big AP Racing 4 Piston Calipers, 330mm Vented 1 piece Rotors, pads, good quality Japanese Braided mesh Brake Lines, Caliper Adapters, and mounting pins/plates/hardware.

post-46-1286508713_thumb.jpg post-46-1286508716_thumb.jpg

Absolutely awesome upgrade!

I am asking $2250.00

Pickup available from North Sydney

Reason for sale? Going bigger :ermm:

Cheers

Deano 1 Mentor

Deano 1

Posted
Posted

how much wider are these than the stardard caili's on a 32 gtr? ive only got about 6mm clearance off the back on my spokes. And what did u run on the rear?? did it affect the bais of the brakes??

very interested

Blitz Grand Master

Blitz

Posted
  • Author
Posted
how much wider are these than the stardard caili's on a 32 gtr? ive only got about 6mm clearance off the back on my spokes. And what did u run on the rear?? did it affect the bais of the brakes??

very interested

Hi mate, these can be run as a front kit only and match up nicely with a set of R33 rear brembos - This is a pretty common setup.

As far as width goes I haven't measured but I wouldn't expect they are any wider than an R33 brembo caliper.

If you are in Sydney and want to have a look and measure you are more than welcome.

Cheers.

Deano 1 Mentor

Deano 1

Posted
Posted

ive only got the factory r32 gtr brakes on my car atm, would they be too much front vs rear if i kept the stardard brakes on the back??

Blitz Grand Master

Blitz

Posted
  • Author
Posted
ive only got the factory r32 gtr brakes on my car atm, would they be too much front vs rear if i kept the stardard brakes on the back??

I wouldn't think so no

Roy Grand Master

Roy

Posted
Posted (edited)

Nice caliper and being a single piece rotor and a second hand kit you dont have to worry about noise etc like you do if you buy used 2pc rotors.

Here is the info on the caliper... http://www.apracing.com/drawings/cp5200_1cd.pdf

You wont have any bias problems with these as they actually have smaller pistons then the std Sumitomo R32 calipers meaning that they get their increase in braking performances courtesy of the larger diameter rotor...so bias will be about the same as std, only with better ability to disperse heat during heavy use

Edited by Roy
Blitz Grand Master

Blitz

Posted
  • Author
Posted
Just wondering, how much work is involved to have this fitted to a R34 GT-t would you know?

I have verified with Just Jap in Sydney that there isn't a lot of work involved at all.

To fit Brembos or another kit such as this from an R32/R33 onto an R34, you will need sleeves for the mounting holes (R34 mounting bolts and holes are larger) which they can supply from Japan for you.

Cheers.

Blitz Grand Master

Blitz

Posted
  • Author
Posted
You need to stop tempting me with all your parts!!!

Lucky i have no money :P

goodluck with the sale!!!

Thanks Nick :P

Still waiting for someone to give them a new home

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • joshuaho96
      UniClutch

      By joshuaho96 · Posted

      All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Piggaz
      UniClutch

      By Piggaz · Posted

      Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...