Jump to content
SAU Community

"dimple" Neodymium Magnetic Sump Plug Group Buy!


Recommended Posts

  • Replies 200
  • Created
  • Last Reply

Top Posters In This Topic

Righteo pictures are here :D

dimple1i.th.jpg

dimple2.th.jpg

The Black Hole magnets actually come as a pack of 6 so they go all the way around the oil filter. Richard sent me them to test out, cut apart the oil filter, take photos and show the results of how they work.

In the next batch if people want to order them by all means we can.

Regarding the postage, I calculated it at around $3-$4 if the thickness passes with normal Ausrtalia post. If people want them ASAP however, I can send them in an express post 500g satchell for an extra $5 if that is cool?

If any one else wants to pay an extra $5 to get it express posted to gaurantee it being delivered before the weekend let me know by tomorrow morning.

Edited by PM-R33
Yeah that's fine. The sump plug will be the same as ours, the diff plug you will have to let me know the size though (might be the same as ours).

Is the ones on the skyline just that 13mm square hole? if so yeh i think its the same

Im cool to wait, Not due for a service for another few weeks so no rush, They look and sound good. Sounds like it will probably pull my big end away from my con rod lol.

But sound like they will be a good bit of insurance :D

Righteo I think I have gotten around the thickness problem. Without the plastic vials and when the plug is on its flat side, the thickness seems to be border line lol.

So when the plugs rock up and you are wondering "Where the hell is that plastic vial that he showed in the photo?". That is why. I did however include the little yellow paper with Dimple, M12 etc written on it :D

Hey Phil,

I am happy to hold mine until the clutch line arrives.. would save posting twice.. could prob leave mine in the vial then.. or take it out... if not let me know and i can transfer more monies to cover the extra costs..

also would be down for the oil filter ones along with diff & gb if we can get confirm on sizes.. on next group buy..

All sent! (I sent yours as well Craig, it's all good.)

Hopefully every one gets them by the end of the week, if not early next week. N1GTR I sent yours express so you should get it Thursday the latest.

One thing I was thinking of though, I hope they don't some how get lost by attaching themselves to a conveyer belt or something! They are just so damn strong lol.

As for the next group buy, I will awaite EJD001 to post up details for the diff and gearbox plugs and then start the next group buy than. We can do the diff/gearbox/sump/Black Holes all in the next group buy.

I'll keep every one posted.

:P

Edited by PM-R33

Sump, gearbox and diff really (the diff and gearbox will actually shed the most amount of metal).

I can't think of any thing else? Maybe on a GTR transfer case aswell?

Edited by PM-R33
Sump, gearbox and diff really (the diff and gearbox will actually shed the most amount of metal).

I can't think of any thing else? Maybe on a GTR transfer case aswell?

different thread size again

Yep just got it!

I have to say, it's a lot stronger than I was expecting. Definatly in for the other ones when you do those-just add me straight away and tell me how much :bunny:

Trader rating time :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...