Jump to content
SAU Community

Recommended Posts

Caltex price theirs at 20c less than unleaded, the price will fluctuate daily. This is a national pricing structure apparently, the tax has also risen on ethanol just recently I think.

They state 70-85% ethanol, no mention of octane rating. Its higher than I need... :D

We've had it here in the switch for a few weeks now.

Octane rating is 105. The amount of ethanol in the blend will change from summer to winter but the ron rating according to them will not alter.

They state 70-85% ethanol, no mention of octane rating. Its higher than I need... :D

Great, so you dynotune your car on an 80ish % batch then refil the next week on a 70ish % batch and blow your motor.

Got to love garbage.

The amount of ethqanol in the blend will change from summer to winter but the ron rating according to them will not alter.

This I highly doubt, are your sure?

Great, so you dynotune your car on an 80ish % batch then refil the next week on a 70ish % batch and blow your motor.

Got to love garbage.

This I highly doubt, are your sure?

Dude i am telling you what they told me. Ethanol isnt the only way to up a ron rating. its been happenning for a long time without it.

Great, so you dynotune your car on an 80ish % batch then refil the next week on a 70ish % batch and blow your motor.

Tested by another member not to be the case. Running E70 on an E85 map will cause it to run rich enough to negate the "drop in ron". Running E85 on E70 map shouldn't cause detonation unless it was a REALLY hot day.

Just get a wideband and keep an eye on it when you fill up.

Great, so you dynotune your car on an 80ish % batch then refil the next week on a 70ish % batch and blow your motor.

Explain to me how a richer blend is going to "blow up" your motor?

Explain to me how a richer blend is going to "blow up" your motor?

All fuels have a rich max and a lean max figure to which they work best at, generally anything between the two will be OK. Anything above or below will result in potential detonation or poor combustion conditions.

Richer does not mean safer in all respects, it is generally accepted that richer is safer due to regular 98 properties. We are talking about lamens terms now and this should not be acceptable in something we put this level of money and developement into.

Fuel blends have always been seasonable with many companies, yet actual mixture percentages advertised at 15% variance is shocking.

Hope I didnt break your heart mate.

All fuels have a rich max and a lean max figure to which they work best at, generally anything between the two will be OK. Anything above or below will result in potential detonation or poor combustion conditions.

Richer does not mean safer in all respects, it is generally accepted that richer is safer due to regular 98 properties. We are talking about lamens terms now and this should not be acceptable in something we put this level of money and developement into.

Fuel blends have always been seasonable with many companies, yet actual mixture percentages advertised at 15% variance is shocking.

Hope I didnt break your heart mate.

No hearts broken here. :D

If you are tuning near the limits of ethanol fuel I will be impressed. I havent heard ping for 8 months since I changed over. The engine protection benefits are huge and worth the drive to fill up, you dont have to push it at all from your 98 map, it will still give you extra power...

As I have already stated, I ran the Caltex e70 on an e85 manildra map and only saw a 1afr richer difference, not enough to do any damage thats for sure. The plugs dont foul with this fuel.

The Caltex I fill at has been selling ethanol for 2 months now and has gone through 2000L, how long do you think before the servo's tank is refilled?

Plugs will foul. Big deal. If you're running E85 and willing to risk it without a wideband, good for you. The money you saved on not covering the base with the wideband will come in handy when you buy new plugs so often.

Keep in mind, Caltex did NOT intend for people to be running this fuel in anything other than a flex fuel taxi. The flex fuel cars have an ethanol content sensor that tells the ECU how much % ethanol there is, and adjusts fuel and ign maps accordingly. Since we don't run this, we need to adjust ourselves. Get a map made on E70, as well as a map made on E85. Watch the WIDEBAND YOU PURCHASED when you drive off from the station. Watch the AFR's and work out in your head (should be simple) what % you just filled up with. Swap map if need be.

Hell, cover ALL bases and have 3 maps made, E70, E77.5, E85.

The Caltex I fill at has been selling ethanol for 2 months now and has gone through 2000L, how long do you think before the servo's tank is refilled?

Just ask the attendant how big the tank is

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...