Jump to content
SAU Community

Recommended Posts

bigger dumps wont help spool up time, it will increase flow and reduce back pressure meaning more lag but more power/kick

once ive converted my gtr to single then ill be able to comment from experience but for now i cant :(

Bigger dumps can and often will help spool time... My trust dumps spooled up my T517Z's quicker.

Keep it simple, bolt on -7's, -5's, -9's- T517Z 8cm's would be my pick.

That's not an rb26

Appears the driver loves the flutter more than gate :)

Soon as he pegs boost, gate opens - gear change.

Only once does he almost wind a full gear out... :(

RB26's with external/single sound no different to RB25's really as the sound is predominately a product of the manifold itself.

Different manifolds, tyres, lengths change the sound. Same as the length/cut of the screamer pipe, size of the gate itself etc etc.

Weapon & cobra when are you guys seeing boost?

It has a r34 flywheel so not sure if that is lighter than a gtr item, I will be adding either an ati or ross balencer as well shortly

Mine makes full 15 psi by 3800rpm

I am probably seeing positive pressure by 2500 i would say by the feel of it. would have to plug the laptop in to get exact rpm but mine is still running very rich so a little sluggish atm and is still quite quick onto boost :D never under estimate a decent manifold lol

Just remember there is a gigantic difference in police attitude on modified cars between Townsville and NSW/VIC. A high mount turbo will be defected instantly by 90+% of Victorian cops. Not sure where the thread owner is located.

And no bigger dump pipes will not cause more lag. They will either reduce lag or stay the same depending on how restrictive the old ones are. The theory from Garrett and others is the bigger the exhaust after the turbo the better.

As above the police up here are relatively fair but won't hesitate to slap you with a hefty fine if its due.

The "hoon" squad from Brisbane have been up here many times. In saying that you do have a valid point with police attitudes

Located in nsw, I have been pulled over in my old show car but never been pulled up in the skyline amazing what attitude 4 doors get :)

Weapon are u using a single entry 35r and what ecu boost controller? What pwr are u making on 15psi?

When are the garrett -5 seeing boost?

And another example lol

My favorite workshop in japan, shop downstairs and on the upstairs level is a cool shot bar which over looks the lower level... and a no f**king sign on the toilet door :)

Hay guys, pretty sure you cleared this up already but just putting my 2 cents in.

got a t04z and went from a 3" dump to a 3.5" and i gained 300 rpm in response. also will be putting cams and from what ive seen ill gain about 400 rpm there..... so a bigger dump definatly helps with response on big turbs.....

having a poke in the dark! what if you wer to say run a 2860 -5 and a 2871r? the 2860 to get you going but the 2871r to help it from running out of puff at the 400 mark

Instant recipie for a dead motor!

Doesnt work on these motors,

Why....Small turbo comes on boost, with pressureises the intake system, air will find the easiest way out, and so will force its way out of the turbo that isnt spinning very hard and bam worlds biggest boost leak, untill the exhaust gas can finally turn the larger turbo and then there is a pressure differential blah blah blah.

having a poke in the dark! what if you wer to say run a 2860 -5 and a 2871r? the 2860 to get you going but the 2871r to help it from running out of puff at the 400 mark

same principal as cars like FD RX7 and Supra and TT soarers. they are a sequential or 'staged' turbo system. it's not as simple as two differentl sized turbos. you need a complex arrangment of valves and piping on both the intake and exhaust side to make it work. GTR is 100% parrallel system. both turbos feed a common inlet. so no you cannot run 2 different sized turbos. well you could but it won't run very nicely. they are a good idea but in practice too difficult to make reliable and for outright performance two equal sized turbos in parallel is the way to go.

Located in nsw, I have been pulled over in my old show car but never been pulled up in the skyline amazing what attitude 4 doors get :)

Weapon are u using a single entry 35r and what ecu boost controller? What pwr are u making on 15psi?

When are the garrett -5 seeing boost?

I am not running any form of boost controller other than the wastegate itself. It is a sigle entry so no split pulse for me lol. Well its a little disapointing as i am having a boost control issue basically which limits my power run to 5000rpm before it spikes (due to where gate is plumbed in) However with no timing and running to around 5000rpm or so its ramping up to 278rwkw before it takes off with boost.

Keep in mind due to this the tune is no where near as good as what it could be so given its performance with no timing etc i was assured around 300-330rwk on 1bar boost. I am running a ViPec plug in ecu and the engine is completely standard ie no cams etc. Custom made 3in dump and front and rest of exhaust is 3.5in with no mufflers in sight

same principal as cars like FD RX7 and Supra and TT soarers. they are a sequential or 'staged' turbo system. it's not as simple as two differentl sized turbos. you need a complex arrangment of valves and piping on both the intake and exhaust side to make it work. GTR is 100% parrallel system. both turbos feed a common inlet. so no you cannot run 2 different sized turbos. well you could but it won't run very nicely. they are a good idea but in practice too difficult to make reliable and for outright performance two equal sized turbos in parallel is the way to go.

Everything above is 100% correct. :):D:):P:P:cool::cool::cool:

So with a decent ebc and tune should.be even faster onto boost then what u have now weapon? What's the drive ability like and touque like ?

I think its alot better than the standard twins in terms of off boost torque, even now it still has good low end urge and top end torque is still damn impressive. the last time it was on the dyno it was making peak torque by about 5-5300rpm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
×
×
  • Create New...