Jump to content
SAU Community

Recommended Posts

Car has:

BLITZ 700cc injectors (most effiecient lag time of all 700cc injectors) $600

BLITZ K5-660r ($2800 new)

BLITZ D1GP manifold (made by their race department, not a buyable part) cost $2000new

BLITZ 47mm Gate with dual screamers. $1000 new

Mega responsive (full 22psi by 4000rpm) 400rwkw setup on BP98 @ 22psi, made 420rwkw on e85 before the injectors ran out, i envisage 460rwkw on E85 @ 22psi

$3800 no offers (if it doesn't sell it will go on my Aristo as i would rather keep it)

ATI 1000hp balancer and water pump pulley (200km old) $600

GREDDY oil Pump (200km old) $700 pics below

RB26 EAGLE H-beam rods $400

New Greddy coil-overs (setup for RB 12kg and 6kg) have original 8kg and 6kg springs too. $1200

Full R32 GTR rear Nismo Arm kit ( lower and traction arm all new) $400

Front s15 NISMO control arm (will fit r33 or if you want to widen track fit to s13 and r32 ) $250

Zenith guard bracing (extensive chassis strengthener) $250

rebuilt steering rack $100

Adjustable toe arms $100

Uras castor rods $200

Uras extra lock tie rods and spacers $200

Super Now tie rod ends $100

Nismo 2way 5000kms $800

R32 GTR cradle

5 bolt shafts not the weak 6 bolt

Str8 thru exhaust with twin rear bozuku flutes $150

oil cooler kit $200

Greddy 115mm intercooler ($2500 new) $600

Greddy radiator (r32 gtr) 1000 new $600

tomei fuel pump (sold) $350

Powerfc d-jetro and all sensors $1200

R34 GTT box bought with 17000kms $1500 can supply it as push or pull, currently setup as push (r33)

BLITZ twin plate (top of the range ORC) $1200

5 stud conversion, S15 front spindles, R32 gtr rear brakes, r33 front brakes, Blitz MR3 pads ($700 when new rear unused, front 80% left) whole lot $1200

whiteline sway bars adjustable front and rear $250

half cage suit sunroof $350

drift tacho and oil temp, oil press, water temp gauges $300

nardi steering wheel

vertical hydraulic handbrake with booster for one finger actuation (std still in place and working) $250

drift kevlar passenger seat with s13 rail $250

2 x sets 17x9 +15 uras ns02 all round with new toyo proxes 4 tyres $1500ea set

High Uras GT wing $200

Uras clear tailights $120

Genuine c-west bonnet $420

Super Made 180sx headlights (see pic) $150ono

much much more or take the lotl for $15k or will split over the next few weeks

IMG_3771.jpg

IMG_3772.jpg

th_catdyno21.jpg

20070522_330ab487e4fd94335bbeg8qPIp.jpg

Newengine001.jpg

Newengine019.jpg

IMG_3764.jpg

IMG_3765.jpg

Newengine006-1.jpg

headcomponentsferrea.jpg

sub2.jpg

ABCD0015.jpg

post-34927-1288352469_thumb.jpg

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

hey there how much u asking for the full turbo setup? and what turbo is it

$3800 no offers (if it doesn't sell it will go on my Aristo, its just to good to sell)

BLITZ K5-660r ($2800 new)

BLITZ D1GP manifold (made by their race department, not a buyable part) cost $2000new

BLITZ 47mm Gate with dual screamers. $1000 new

Mega responsive (full 22psi by 4000rpm) 400rwkw setup on BP98 @ 22psi, made 420rwkw on e85 before the injectors ran out, i envisage 460rwkw on E85 @ 22psi

Trent its andrew with red sil80 if you can, hold the guard braces and gtr subframe till i get back from japan if possible..... but if get buyer selll sell sell!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...