Jump to content
SAU Community

Recommended Posts

I'll keep this short:

I'm looking to source a genuine R34 GT-R rear wing and I had Blackburn Nissan in Melbourne recommended to me by Japcar in Fawkner. I've emailed them asking how much they would cost and I've just gotten "give me chassis and model number, otherwise we can't help".

Said it before and I'll say it again: I've got very little experience in GT-R's, only the obvious stuff on how they are different to the normal GT/GTT's, not anything specific on numbers...

Now this person at Blackburn has replied, "I am sorry but our parts system works of vin number and when you try and select the one you require it will bring them all and it has to be Japanese translated which we cannot do so with details it is impossible". I only have a vague idea of what a vin number is, my dad pointed it out to me when we had the bonnet up the other day and he pointed out the little blue plate in the engine bay with the paint code and other info.

Yes, I'd say it's a very reasonable request on their part but at the moment it just feels like another obstacle I've run into. I'm sure the genuine wing would probably cost an arm and a leg, but I'd rather take my time and get the real thing over some $300 knock-off on ebay or a fibreglass replica from Carmate.

Any thoughts?

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/
Share on other sites

Shit man, open the damn bonnet and get the number off the tag.

It's also on your rego certificate, your insurance certificate, etc.

Yes, Nissan 'in general' need your VIN. With that they know everything you car was built with, even the transmission, paint colour, and build number.

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5522373
Share on other sites

Unfortunately the car it's going on is a 25GT, so the vin from that probably won't help.

The alternative to getting a genuine one from nissan is the "GTR-Medium" style of rear wing on Carmate (NSGTR99GTRMEDIUMRW). But I've heard of people complaining about the service at Carmate, something to do with damaged or poorly made goods.

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5522387
Share on other sites

Unfortunately the car it's going on is a 25GT, so the vin from that probably won't help.

The alternative to getting a genuine one from nissan is the "GTR-Medium" style of rear wing on Carmate (NSGTR99GTRMEDIUMRW). But I've heard of people complaining about the service at Carmate, something to do with damaged or poorly made goods.

Don't places like Ebay show the VIN of cars for sale? Just get someone elses VIN which has the spoiler you want, give that number to Nissan. Eitherway thought yeah it'll be expensive from them.

Lol: I do the same thing when looking at available internet in a new suburb I'll be looking at moving to ;)

Edited by GTRPowa
Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5522426
Share on other sites

UWISSH: Cheers for that bro, I emailed importmonster.com.au

There was one on their list, but as things are going right now I won't actually be purchasing the wing at this moment but in a month or two, but I wanted to get my research started.

GTRPowa: I did consider trying the VIN of someone else's car. Before I could go looking for one, my dad pretty much put his foot down: "No, no f#%king way you're using someone else's VIN number! You'd be an idiot to do that!"

Wouldn't elaborate, wouldn't give any kind of explanation. I haven't the faintest idea why he got so agitated, is there any security risk of using someone else's VIN?

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5522478
Share on other sites

UWISSH: Cheers for that bro, I emailed importmonster.com.au

There was one on their list, but as things are going right now I won't actually be purchasing the wing at this moment but in a month or two, but I wanted to get my research started.

GTRPowa: I did consider trying the VIN of someone else's car. Before I could go looking for one, my dad pretty much put his foot down: "No, no f#%king way you're using someone else's VIN number! You'd be an idiot to do that!"

Wouldn't elaborate, wouldn't give any kind of explanation. I haven't the faintest idea why he got so agitated, is there any security risk of using someone else's VIN?

PM me for my VIN.

I'm probably older than your Dad :ermm:

It's best to stay away from Carmate unless you can do an on-the-spot test-fit; otherwise they're OK.

I'm shortly getting another R34 GT-R from Japan; but it has a large aftermarket rear wing on high metal stems (more like what's on Mark Berry's Superlap car). You might want to buy that off me. :ermm:

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5522650
Share on other sites

1. Don't buy one from Nissan, I gaurantee it would be over $2000+ genuine (I remember reading some where that a factory R34 GTR gear knob was $300 from Nissan!).

2. If you want to know the price, just use a random VIN number off ebay. Your old man is on drugs, all Nissan do is type the VIN number in, look up the part, tell you the price and that is that. You aint commiting fraud and are going to go to jail or something. Here, I even did it for you: 6U9000BNR34002620 There. Done.

3. Buy one from Japan through Import Monster or some one.

Done.

Edited by PM-R33
Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5525167
Share on other sites

most used gtr spoilers will fetch around 50,000 yen on yahoo auctions

depending on the colour & if it includes the wing blades

the full "carbon" versions are total rubbish compared to the standard one

they dont even look anything like the original design close up

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5525304
Share on other sites

UAS sell replica GTR wings

Also you don't necessarily need a VIN to use FAST, just use model series R34 and look for air spoiler, RB26DETT... I got part number 96030Q

Edited by ichizora
Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5525456
Share on other sites

Finally got my reply back from Blackburn Nissan and had a bit of a giggle when I saw his pricetag: $4589.39

Yeah... I think I'll pass on that.

Cheers for the all the different sources, a lot of them are already looking a lot more viable than carmate.

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5536634
Share on other sites

For anyone to be in the state of mind where they would find over 4k a reasonable price, they'd need to be buying it for their Z-Tune or something.

For a N/A Auto 25GT, err no.

Yeah the $695 on UAS for a replica is more in my price range.

Seems a bit of a moot point now, as all I'm likely to do to the car is just source the Nismo rear bar to complete the bodykit set (the one that people call either Nismo or Altia). That way when I sell it I can say it's got the full kit. Plans are to just enjoy this car for a year or two, maybe more and then go looking for something like a nice GTT... But I've also got buddies trying to sell the idea of me getting a 33 GTR.

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5536829
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
×
×
  • Create New...