Jump to content
SAU Community

Recommended Posts

Picked up my car this morning, resplendent in new heatwrapped mid pipe, 100 cell hiflow cat, and shiny Fujitsubo exhaust fitted. Now it's 3" from turbo to tip.

Canak Autosport did a beautiful job on the mid pipe; tucked up nice and close to the floor, out of harms way. Cost a little more than I expected, but there's almost $400 in cat, flex joint and flanges.

Sounds brilliant, no drone, just a sweet rumble at idle, and nice rasp as you rev out. Now pushes almost 15 psi instead of 12, feels so much more responsive!

One very happy camper.

Picked up my car this morning, resplendent in new heatwrapped mid pipe, 100 cell hiflow cat, and shiny Fujitsubo exhaust fitted. Now it's 3" from turbo to tip.

Canak Autosport did a beautiful job on the mid pipe; tucked up nice and close to the floor, out of harms way. Cost a little more than I expected, but there's almost $400 in cat, flex joint and flanges.

Sounds brilliant, no drone, just a sweet rumble at idle, and nice rasp as you rev out. Now pushes almost 15 psi instead of 12, feels so much more responsive!

One very happy camper.

Good stuff Dale...

Picked up some 33gtr swaybars last night, will chuck them in on the weekend and pull the diff out to be dropped to my diff guy on Tuesday... SkidWagon is getting close.. BRING ON POWERCRUISE!

Picked up my car this morning, resplendent in new heatwrapped mid pipe, 100 cell hiflow cat, and shiny Fujitsubo exhaust fitted. Now it's 3" from turbo to tip.

Canak Autosport did a beautiful job on the mid pipe; tucked up nice and close to the floor, out of harms way. Cost a little more than I expected, but there's almost $400 in cat, flex joint and flanges.

Sounds brilliant, no drone, just a sweet rumble at idle, and nice rasp as you rev out. Now pushes almost 15 psi instead of 12, feels so much more responsive!

One very happy camper.

Bet that sounds shit hot also Daleo..as well as looking quite smart! *thumbs up* :O

Im actually wondering if the HKS suited for the M35 sports muffler on my full 3" system from scotty actually gives more power than the fujtsubo / kakimoto M35 systems. I know the Fujitsubo and Kakimoto's have a much nicer quieter tone. (bit like a rexy bob)

My question is would there be any difference as mine is like 50 times louder?

Edited by PetroDola

I think it comes down to the design more so than how loud it is.

Both the Fujitsubo and Kakimoto exhausts are designed to flow as much air with as little restriction as possible while their muffler setups use vastly different designs to control the sound/volume

I think that the only way to tell if yours makes more power would be to dyno them back to back on the same car.

You can't look at Scott's dyno results for a comparison between the two because he changes shit on his car every second day :O

Edited by iamhe77
I think it comes down to the design more so than how loud it is.

Both the Fujitsubo and Kakimoto exhausts are designed to flow as much air with as little restriction as possible while their muffler setups use vastly different designs to control the sound/volume

I think that the only way to tell if yours makes more power would be to dyno them back to back on the same car.

You can't look at Scott's dyno results for a comparison between the two because he changes shit on his car every second day :O

hrmm good Point Iain.

Im wondering if scott has any dyno's done with just that exhaust mod from stock :huh:

and what impact it had...would be interesting to know the difference for sure.

Cheers!

Had the 260RS profesionally detailed today. Got the lot done for $300 which I recon is bloody cheap! Then brought it home and polished the GReddy intake pipes. Man I love this car even more now!! :)

A bit lame but bought some 15mm hubcentric spacers from JustJap.

Matt@JustJap had them delivered to my door within 3.5hrs (ordered 10.15am sitting on the doorstep at work by 1.45pm). That is outstanding service and deserves a pat on the back.

I have a HKS2835ProS going on next week to replace the perfectly fine HKS GT-RS which will be a more interesting mod. More on this next week.

hrmm good Point Iain.

Im wondering if scott has any dyno's done with just that exhaust mod from stock :D

and what impact it had...would be interesting to know the difference for sure.

Cheers!

I asked for the system to be fitted when I bought the car so no pre graphs, I cant even remember what it drove like... I think the words were "4 cats, you are kidding right". :blink:

hrmm good Point Iain.

Im wondering if scott has any dyno's done with just that exhaust mod from stock :D

and what impact it had...would be interesting to know the difference for sure.

Cheers!

Im pretty sure you replied to Cam's post and not mine mate :P

its not like we are remotely the same, he has a gay coloured car!!

lol... and you have a stock kinda car (or is that a "gonna" kind of car :laugh:) with an old-man interior!

Anyway, minor-ish service on my Stag today - oil, cleaned intake and a/c filters, changed plugs etc, etc...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...