Jump to content
SAU Community

Recommended Posts

Maybe look at an Aus delivered R32?

Cost a bit more though, but you'll prob have a better chance of it being unmodified and in decent condition.

regardless of what i bought i'de probably bring it mostly to stock. bar an exhaust for some noise.

finding a straight one is hard..

ive seen a few in the FS section, ones fkn amazing! but not ready just yet.

Good luck fitting your audio gear into the back of a GT-R :whistling:

True that.

That one thing I love about my Stag. I was able to used the storage departments in the back and do a stealth install of my 4 channel and mono amplifier.

lol nah im looking for an already built motor.. if theres other bits on it, it will go back to Twin turbo and as stock looking as possible..

or evo. nah i dont know anything about them so wont touch anything but maybe an exhaust

I call bullshit.

Plenty of bolt ons for Evos. Only a matter of time...

Only looking at 32s? Not 33s or 34s?

nah, im not much of a fan of the 33 GTR and the 34r is well out of my price range.

32 i wanted since i looked for my first car. but for obvious reasons did not get one.

i know there are plenty of bolts ons for evo, but i dont think i wanna start a learning curve again with another engine. an exhaust and a tune i'd be happy. those things are zippy anyway.

Aaron, go the Evo. You'll enjoy the nimbleness (is that a word?) over the GTR and they are more practical (some might even say more reliable).

Damn easy to make power with them too.

+ 1 on the Evo......8 or 9 is the go!

yeh, by the time my car sells the 8 would have come down in price.

i am leaning towards the evo just because of the 4 door.

was looking at this.(which i doubt would still be for sale when i buy but dream) and they look schmick!

http://www.carsales....t=evo&trecs=101

I had that model Evo before my Stag. It was the most reliable car I've ever had. I loved that car, a little razor on wheels. One thing I will say is that in some ways they are too easy to drive, 70/80 degree bends at 100kph don't seem too much of a problem.

I had an ecu tune, exhaust, fuel pump and a boost controller (only with another .2bar) and I was making 225awkw and 550 nm torque. Mid 12 sec 0-400 - The mods cost me about 3k, being an MR version a lot of the internals are up spec and if you so wished could really boost the hell out of them. I had a very conservative tune.

Edited by ArdentEagle

Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo, Evo

:teehee:

I had that model Evo before my Stag. It was the most reliable car I've ever had. I loved that car, a little razor on wheels. One thing I will say is that in some ways they are too easy to drive, 70/80 degree bends at 100kph don't seem too much of a problem.

I had an ecu tune, exhaust, fuel pump and a boost controller (only with another .2bar) and I was making 225awkw and 550 nm torque. Mid 12 sec 0-400 - The mods cost me about 3k, being an MR version a lot of the internals are up spec and if you so wished could really boost the hell out of them. I had a very conservative tune.

yeh thats what i was told. especially the mr GSRs are meant to be capable of 250+kw (e85 would be my choice lol)

buy an evo, it appears you cant drive anyway and they have plenty of computers on board to keep you on the road and do the driving for you :P

uncalled for you smelly prick lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...