Jump to content
SAU Community

Recommended Posts

No I have not, but if you look through the list in the link I posted it shows all the rail types available for the C34, and the RO is available. Forget Skyline... I didn't mention it.

  • 4 weeks later...

Seats in and im not too worried about suspension anymore, most of the boat feeling was me sliding on the leather, springs could be a little firmer on the front as it dips slightly on sharp corners but swaybars and a tight seat made a huge difference. I would recommend a seat as a first mod on any car. Actually it would be stupid to do any suspension mods without a good seat. you can feel everything.

looking for an LSD for the rear only, the cheaper the better.

I think the stagea uses an r200 diff? can i use the lsd centre and put it in my diff with my standard gears and axles etc? I've been searching all day but i can't find much. i think i need to keep my diff gears the same so i dont blow the front diff.

  • 3 months later...
  • 2 weeks later...
  • 1 month later...

My household added 2 cars to the garage in the last few weeks & retired my work X-Trail. The old girl was uneconomical to register again so I gave her to a mate who now uses it as a mountain bike shuttle bus come paddock basher. Hopefully it will last another 10 years.

My son bought a manual E46 BMW 328Ci - not bad for a 1st car (still on his learner licence). Amazing how much a >$92K car (when new) can drop in 14 years. It has 19's & is so low the top of the tyres are hidden under the guards. Funnily it still has more ground clearance than the M35 & doesn't scrape on anything.

And I bought an Audi Q5 3.0Tdi for my work truck. The fuel economy V's performance equation is outstanding with my 3 tank fills returning from 7.3 - 8.3L/100 (up to 900km from a tank). All this from a 2T SUV with 500Nm & 0-100 time of 6.5s (they say).

My point, which I'm getting to - out of all the cars, the best one to drive by far, is the M35. The Q5 has ridiculously heavy steering once past about 40km/h. It's so heavy & wooden I suspect the engineers did it on purpose to mask the darty & sometimes jittery road dynamics. And the ride is way firmer than it needs to be, although it is softer than the misses' A3 with the 'sports suspension'. It might work in Germany, but there's no need for it in Aus. The M35 is much more compliant, even plush by comparison, & it drives on mind control - the sort where you don't even remember steering around the last few corners. And on straight roads, it tracks true.

The Euro cars are excellent in so many ways, & I would recommend Audi in particular to almost anyone, but fair dinkum, the Stagea has so much going for it.

Anyway, in the spirit of this thread:

Take 2 slices of bread, lightly buttered on the outsides,

Place slice/s of your favourite cheese inside & place in sandwich toaster press.

Remove when golden brown

Totally agree Leon, I have driven so many cars and have yet to find one that rides and turns as well as the Stagea. (although I have spent a bit to get it there...) I just can't suggest a better car, let alone for the money.

If only it came in manual...

  • Like 1

I tried and tried to get my old man to look at an M35 or PNM35 when he bought his Audi A4 Avant 2.0TFSI back in 2011, but he had his mind made up. Now we hear that they're "designed to consume up to half a litre of oil every 1,000kms" - WTF?

He's currently doing a 1,000km oil consumption test before taking it back there to see if it's still "within spec" or actually needs pistons and rings replaced.

Oh, and don't EVER buy a car with a CVT, it sucks balls to drive, and is probably a contributor to the excessive oil consumption - keeping the car in a constant rev range apparently increases the likelihood of glazing the bores of the cylinders.

Good to hear - people are usually temped out of the imports by the Euros. Sometimes its better.

I've been driving the PNM for a couple of days now (the mrs relinquished the keys), such a great car - so happy with the balance of it.

Totally agree Leon, I have driven so many cars and have yet to find one that rides and turns as well as the Stagea. (although I have spent a bit to get it there...) I just can't suggest a better car, let alone for the money.

If only it came in manual...

You hit it on the mark when you compare on value. I can't think of anything I've driven that compares in the ride/steering department. And I'm not talking simply about performance driving - even getting from A to B.

The Audi's do have their DSG boxes sorted though. Yeah they some some quirks, but that's more German engineering logic in the programming than anything else. They change solidly & quickly (faster than I can with a traditional manual) - same tech as Lambo I suppose.

Personally I wouldn't go down the path of a manual for the M35. I'm too old & lazy so the effort/cost required puts it very low on the to do list, but keen to see it happen.

I tried and tried to get my old man to look at an M35 or PNM35 when he bought his Audi A4 Avant 2.0TFSI back in 2011, but he had his mind made up. Now we hear that they're "designed to consume up to half a litre of oil every 1,000kms" - WTF?

He's currently doing a 1,000km oil consumption test before taking it back there to see if it's still "within spec" or actually needs pistons and rings replaced.

Oh, and don't EVER buy a car with a CVT, it sucks balls to drive, and is probably a contributor to the excessive oil consumption - keeping the car in a constant rev range apparently increases the likelihood of glazing the bores of the cylinders.

I've heard there are various models with this high oil consumption designed into the engine. That's crazy.

I was talking to an Audi mechanic this week about my car. It has an electronic dipstick (lol) & I was questioning him about the reading on the in-car display. When I told him what engine variant was in mine, he said that it wasn't one that consumed oil. He had nothing to gain/lose by not telling me the truth, & it matches the reading I get when I check. It says to drain off some oil, ie was overfilled last service. That was probably 10,000km ago (not sure i agree with the long service intervals), so can't be a high oil consumption engine. I'm not that interested in syringing out half a cup of oil, so it can wait till I change it.

Re CVT 'boxes, I wouldn't have one in any car, regardless of the emblem on the grill.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...