Jump to content
SAU Community

Anyone Installed One Of These?

Old Gregg

By Old Gregg,
in Four Door Family & Wagoneers

 Share

Recommended Posts

scotty nm35 Grand Master

scotty nm35

Posted
Posted

That dolphin pipe only replaces the rubber part at the top of the stock intake, see below. If you remove the rubber part you will see its very smooth inside and actually flows pretty well.

The lower part is the issue, it limited me to 200awkw as it is only 45 odd mm diameter, much smaller than the front wheel on most highflows. I have been making aftermarket intakes for a few of the guys, mine is 80mm and flowing 300awkw on ethanol atm.

post-63525-1288625557_thumb.jpg

post-63525-1288625859_thumb.jpg

Jetwreck Grand Master

Jetwreck

Posted
Posted (edited)

yeh I thought long and hard about getting the Dolphin one too.....as Cam said it will improve the flow but it will still be limited.

I opted to go with Scott for mine as I have a H/F and I wanted to match the intake side of the turbo to the intake pipe diameter. Scott's pipe made a pretty big difference to my car right through the range.

P.S. For around the same money as the Dolphin one you could get a custom one made in Australia that will go all the way down to the turbo.

Edited by Jetwreck
Old Gregg Enthusiast

Old Gregg

Posted
  • Author
Posted
yeh I thought long and hard about getting the Dolphin one too.....as Cam said it will improve the flow but it will still be limited.

I opted to go with Scott for mine as I have a H/F and I wanted to match the intake side of the turbo to the intake pipe diameter. Scott's pipe made a pretty big difference to my car right through the range.

P.S. For around the same money as the Dolphin one you could get a custom one made in Australia that will go all the way down to the turbo.

It looked a bit small compared to the pics of Scott's. Thankyou for the comments gentlemen you have saved me wasting money. They are shinier though......

Had thought one of the custom dumps when ready and improved flow to turbo would make sense as first steps and not affect warranty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...