Jump to content
SAU Community

Recommended Posts

ok been to eastern creek 2 times now with my gtr , 316rwkw @ 16psi from a to4z (stock head :) so very lagy)

this is my times so far all on falken 235 / 40 /18

12.512 @ 112.77 mph with a 1.789 60 footer

and

12.394 @ 112.84 mph with a 1.842 60 footer

and last time i went down my best time was

12.302 @ 114.47 mph with a 1.849 60 footer

ok my question is can i get faster with my current setup?(with out going to other tyres)

thanks heaps

Link to comment
https://www.sau.com.au/forums/topic/342955-can-some-one-help/
Share on other sites

times are close to where you would expect them with your current power and sixty foot times.

tyres will improve your sixty foot time, and run if your currently getting wheel spin.

ok been to eastern creek 2 times now with my gtr , 316rwkw @ 16psi from a to4z (stock head :) so very lagy)

this is my times so far all on falken 235 / 40 /18

12.512 @ 112.77 mph with a 1.789 60 footer

and

12.394 @ 112.84 mph with a 1.842 60 footer

and last time i went down my best time was

12.302 @ 114.47 mph with a 1.849 60 footer

ok my question is can i get faster with my current setup?(with out going to other tyres)

thanks heaps

i ran 11.36 on stock turbos, stock head, 290rwkw, 265 35 18 tyres and 1.7-1.8 60fts we talked atthe track the other night and i said then you should put on some cam gears and get them dialed in it will help reduce your lag and setting them up don't worry so much about hp as it means very little aim more for as much low end torque as you can get for you current set up, your 60 fts are ok with the tyres your running you need to get more mph

i ran 11.36 on stock turbos, stock head, 290rwkw, 265 35 18 tyres and 1.7-1.8 60fts we talked atthe track the other night and i said then you should put on some cam gears and get them dialed in it will help reduce your lag and setting them up don't worry so much about hp as it means very little aim more for as much low end torque as you can get for you current set up, your 60 fts are ok with the tyres your running you need to get more mph

125mph ??? thats 500+ rwhp trap speed..... were you able to repeat it (not necissarily the 11.36, but moreso the 125mph) ?

LOL, no way!

wayyy back in 2002 I ran 11.13 @ 128.5 (1.82 60ft) on a stock bottom end with Apexi low mounts and other little odds and sods.

315RWKW.

New owner in Tassie re-tuned it and went 10.80 at similar mph.

Maybe they were really really big killer Wasps?

They were Qld ones after all, our are bigger and stronger! :)

I think the MPH is below what it should be with a genuine 316kw. I've run over 112mph with only 250kw and ran low 12s about 5 years ago with stock engine and stock turbos @1bar.

60ft is not bad, but the fact that you're only running 112/114 mph means you are down on power. to get into the 11s your going to need a fantastic run or more power. either that or the power deliver is really bad. but with 316kw you should have higher TS than 112mph...

the car is booked in to get cam gears and surge system so i can actually run more boost.

XKLABA did u happen to get what the std cam's are meant to be dialed in at yet?

and as for lag , i don't get full boost till about 5000 too 5500rpm so yer it is fairly lagy :)

I have a genuine 500rwhp (closer to 540 actually, but lets say 500) and I did an 11.5 @ 126mph. Spose the 32GTR's weigh a bit less. Those online calculator thingies tend to agree with me though:

Vehicle Weight

In Pounds

3250 (1475kg with fuel and driver)

1/4 Mile

Trap Speed

in MPH

126

Your Rear Wheel

Horsepower

is: 507.3964497041419

Which is pretty close to what my dyno says.

If i change the weight to 1425kg for a 32gtr with fuel and driver:

Vehicle Weight

In Pounds

3141

1/4 Mile

Trap Speed

in MPH

125

Your Rear Wheel

Horsepower

is: 478

Still a lot more than 290kw...

Meh, you have the slip that says you did it. Kudo's to you. Maybe you guys are all skinny bastards and are better at stripping your cars out than me :)

I've never truly believed those online calculators. Rarely are they totally accurate.

A lot of things like diff gearing, how many gears you are changing and so on all have effects in various ways, even rim size.

I also know of two friends in stock turbo R32 GTR's that have run 11.5 and 11.7 respectively - no idea of MPH - They surely cannot have any more than 270rwkw either way.

The 11.5 was driven without one iota of mechanical sympathy (flat changed etc). 11.7 was a bit more forgiving.

Just for info sake - with ~210rwkw I was regularly running 110-112mph (2.0 60ft/RWD) @ Calder in my HR31 back when i raced regularly.

Car was just over 1400kg without me in it and under half a tank of gas. So would have been 1500kg on race day (roughly, car was never stripped)

I still think the low mph is telling us it's down on power. 316kw should give a fair whack more than 112mph.

btw most GTRs with fuel and driver will be much heavier than 1475kg. regardless of 32/33/34 none of them will be under 1500kg with fuel and average driver unless they have had some weight reduction done.

Yep, the 60' times are usual for street tyres, but as mentioned above, its the trap speed that is down. You may well have 316rwkw, however, that isn't being reflected in the trap speed, and this is were the issue is. better rubber might get you an ET in the high 11's, but the MPH doesn't lie.

Yep, the 60' times are usual for street tyres, but as mentioned above, its the trap speed that is down. You may well have 316rwkw, however, that isn't being reflected in the trap speed, and this is were the issue is. better rubber might get you an ET in the high 11's, but the MPH doesn't lie.

yea sounds like more like 250 killer wasps#

even with 3k rpm you should be charging hard to4z styles

#i have only ever done 4 drag races, check my sig apparently that dude knows how to do it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...