Jump to content
SAU Community

Recommended Posts

I had to opt out R because the fellow who was going to buy my newly landed R34 GT-R VS2 hasn't called back.

I've decided to stick with the new car - but thanks for your interest. New propellers go on in two wks. Committed now!

  • 3 weeks later...

Here you go Tez: http://www.carsales.com.au/all-cars/private/details.aspx?R=10178535&__Qpb=true&Cr=1&__Ns=pCar_PriceSort_Decimal|1||pCar_RankSort_Int32|1||pCar_Make_String|0||pCar_Model_String|0&keywords=&__N=1216 1246 1247 1252 1282 4294963846 4294963593 4294950696&SearchAction=N&silo=1011&seot=1&tsrc=allcarhome&__Nne=15&trecs=36&__sid=11E182429C71

Time for a drive to the coast?

great thread....and good to meet you at Hills the other day Bob.

Skaifey's old car is also in the NSW club...it won Best r32 at the 21st anniversary cruise.

And I can assure you gibson played with it....it goes very well for a "standard" gtr, about the same power as my n1 spec production race car.

Also I saw both of Kerry Packer's GTRs at Hills Motorsport in the last 12 months. Both also "touched" by gibson with some mods to the bottom end, cams and sump.

  • 2 weeks later...

Also I saw both of Kerry Packer's GTRs at Hills Motorsport in the last 12 months. Both also "touched" by gibson with some mods to the bottom end, cams and sump.

funny u say that duncan - my brother in law gets to see packers aussie gtr's in the garage on a daily basis in bellevue hill, he is a packer employee the lucky bugger

hi bob,

in response to your pm from a few weeks ago (as i want to share this with other aust gtr owners) - i finally found a reference in regards to only 67 of 100 aust gtr's were sold in aust :)

refer to paragraph 6 which states the following:

"In 1991 and to capitalise on the car's competition success, Nissan Oz imported a batch of road-going GT-Rs. Just 100 of the 2.6-litre, twin-turboed 'six' with 4WD and four-wheel steer were in the first boatload and priced at $107,000 each. At a time when the cheapest Porsche 911 in the book was worth a neat $60,000 more than the Nissan, hopes were high that those 100 'Zillas would be sold within minutes of word spreading. It didn't happen. At the end of 1992 and coinciding with the car's banishment from Touring Car competition the sales tally stood at 67 cars and Nissan announced that no more would be imported. Officially, anyway."

here is the article:

http://www.uniquecars.carpoint.com.au/portal/alias__uniquecarsau/tabID__203009/ArticleID__5004/DesktopDefault.aspx

hi bob,

in response to your pm from a few weeks ago (as i want to share this with other aust gtr owners) - i finally found a reference in regards to only 67 of 100 aust gtr's were sold in aust :)

refer to paragraph 6 which states the following:

"In 1991 and to capitalise on the car's competition success, Nissan Oz imported a batch of road-going GT-Rs. Just 100 of the 2.6-litre, twin-turboed 'six' with 4WD and four-wheel steer were in the first boatload and priced at $107,000 each. At a time when the cheapest Porsche 911 in the book was worth a neat $60,000 more than the Nissan, hopes were high that those 100 'Zillas would be sold within minutes of word spreading. It didn't happen. At the end of 1992 and coinciding with the car's banishment from Touring Car competition the sales tally stood at 67 cars and Nissan announced that no more would be imported. Officially, anyway."

here is the article:

http://www.uniquecar...topDefault.aspx

Thanks for that........ I did read that article but further investigations have confirmed that the remaining cars were eventually sold. I spoke to an ex-Capital Motors Nissan salesperson who remembers the cars well.

Many of you may not know this but when the VL Group A SS (Walkingshaw not Brock) was released, it was meant to be a 500 build but Holden got greedy and built another 250.

The bulk of these took forever to sell.

I remember going into a Holden dealer early in 1989 looking at buying a VN Executive Station Wagon. A brand new VL GPA was still on display on the showroom floor. They stopped making these in 1987.

The GTR's are much the same however the remaining 33 cars did eventually find homes according to my source..................

Bob.

Edited by Aussie_Delivered_R32_GTR

Thanks for that........ I did read that article but further investigations have confirmed that the remaining cars were eventually sold. I spoke to an ex-Capital Motors Nissan salesperson who remembers the cars well.

Many of you may not know this but when the VL Group A SS (Walkingshaw not Brock) was released, it was meant to be a 500 build but Holden got greedy and built another 250.

The bulk of these took forever to sell.

I remember going into a Holden dealer early in 1989 looking at buying a VN Executive Station Wagon. A brand new VL GPA was still on display on the showroom floor. They stopped making these in 1987.

The GTR's are much the same however the remaining 33 cars did eventually find homes according to my source..................

Bob.

i also remember the vl group ss & looking at a new 1 in a holden yard back in 87 with my dad (he had a torana ss 5ltr hatchback)

what was the split between the red, black & silver when released in terms of numbers?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...