Jump to content
SAU Community

Recommended Posts

Rekn

Wwbbers a chance? Im feeling both red boys b4 him

It is dubious whether he has KERS for the race so he will be swamped on the start and end up compromised by track position for his race. Same as the start in Monaco, despite getting it away pretty well for a change, he was overrun.

Last year RBR made sure they slotted Capt'n Chin in behind SV by not pitting him when he had a 20 second lead and should have raced LH for the top step of the podium with fresh tyres. SV will get the better of the strategy from the pitwall especially if it rains (and rightly so this year anyway).

BBC commentators were saying during qually that Red Bull kers system was 2/3 the power output to the rest of the field. I'd guess that that would be the case for SV but Webber would be less again. Agree with him getting swamped off the start. Who else thinks SV hit the wall of champs on purpose lol

Webber is surely due for a blinder off the start. I had a dream earlier in the week which i told my housemate...Webber off the second row and leading by the first turn was the dream

Unless his KERS comes back on line for race start then I have about as much chance of eating sushi off Heather Graham's naked torso.

A real shame.

So am i the only one still up for the race yo?

missed the qually and pracs being out of range etc, so yeah, still looking like a fun run? No drs in the wet? will channel 10 still choke the balls of the telecast @ 3am?

yet to see!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...