Jump to content
SAU Community

Recommended Posts

James Allison has revealed that different engine mapping, a cracked exhaust and a long pit stop were the cause of Nick Heidfeld's Hungarian fire.

(pf1)

Heidfeld was forced to retire from the Hungarian GP when his Renault R31 caught fire after his pit stop. The German parked on the side of the track at the pit lane exit and quickly jumped out.

Marshals arrived at the burning car with fire extinguishers, however, one appeared to be injured when the left side of the car exploded, showering the track with debris.

"As with most accidents, several incidents combined to cause the fire that Nick suffered in Hungary," explained Renault's technical director.

"First of all, we ran a slightly different engine mapping strategy in qualifying, which produced hotter than normal exhausts. We believe that this elevated temperature and caused a preliminary crack in the exhaust pipe.

"We presume that the crack then propagated during the laps to the pit stop - this was not evident to us as we believe that the failure occurred upstream of the place where we have a temperature sensor. We believe that Nick then came in with a partially failed exhaust.

"This pit stop took longer than normal, the engine was left at high rpm for 6.3 sec, waiting for the tyre change to be completed.

"Under these conditions, a lot of excess fuel always ends up in the exhausts and their temperature rises at around 100°C/sec. This temperature rise was enough to finish off the partially failed pipe and to start a moderate fire under the bodywork."

As for the explosion, Allison said that "this was caused by the air bottle which supplies the air valves in the engine. It has overheated in the fire and failed."

The team has already spoken with the FIA about their findings with Allison saying they are doing everything to ensure there won't be a repeat of the incident.

"The incident was highly undesirable, as it has caused us to write off a chassis.

"We will take steps prior to the next race to reduce the likelihood of a further fire and to ensure that the air bottle cannot overheat.

"We are in touch with the FIA both to provide them with a full report of the incident and also to explain to them the actions we are taking to prevent a re-occurrence."

Mercedes GP are reportedly keen on signing former Ferrari technical director Aldo Costa as part of a 'profound restructuring of the team.

After a disappointing start to the Championship for Ferrari, Costa, who had been their technical director for just over three years, was replaced by Pat Fry.

And although the Scuderia said at the time that Costa would remain in an undefined position, it was announced in July that he would in fact be leaving.

The 50-year-old was placed on "gardening leave" until the end of the year.

However, Costa may not be without a job for too long as Mercedes GP are reportedly interested in signing him.

According to Auto Sprint, Merc GP team boss Ross Brawn, a former Ferrari man himself, wants Costa as part of a 'profound restructuring of the team.'

Brawn is believed to have already spoken to Dieter Zetsche, the head of Daimler, about his need to employ more technical staff in order to compete against the likes of McLaren, Ferrari and Red Bull.

And Costa is at the top of his list.

i dont think its the right move for them, but they do need to step up in 2012, so maybe doing something is better than nothing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...