Jump to content
SAU Community

Recommended Posts

I am looking for a R33 GTR wing blade that i have seen before on a few GTR's ..

it is almost like the standard blade, though there is one big blade and one smaller blade (above and at the back), sort of like the Nur Spec R34 (but obviously for the R33!)

is it the 400R wing? if so do anyone make similar copies etc?

sorry if it doesn't make too much sense.. hopefully someone will know what i am talking about!

Link to comment
https://www.sau.com.au/forums/topic/34576-who-makes-this-rear-gtr-blade/
Share on other sites

it is almost like the standard blade, though there is one big blade and one smaller blade (above and at the back)

Nismo make one (400R had it).

Electra make one - http://www.electra-cps.com/e_framemain.htm - but you'd better get that platinum AMEX ready... 260,000 yen

c_33_r221.jpg

Predator has a DSpeed kit with a twin-blade wing (but is a different rear spoiler unit)

There's also the gurney flap option (ala R33 N1 carbon blade) - Hasemi Sport make one that fits on the top of a standard wing blade:

http://www.hasemi-ms.com/R33GTGTRW.JPG

AutoSelect make this interesting alternative:

chibi_devil.jpg

ricknismo

that's the puppy! i forgot to mention it was carboin fibre anyways!

if you can PM me a price i may be very interested! (unless it is bloody expensive :D )

thanks to the rest of you as well, i havn't seen that many blades before! good jobs!

You'll have to send an email to [email protected] or [email protected] or ring 0405440526 or 0403 575 555

.

I really have no idea about cost as I already had mine but tell jason that Rick told you and I'm sure he'll give an awesome price...He's a good bloke.

Actually let me know when you get a price, my carbon is a bit dated...too much time in the sun in Japan I think.

  • 2 months later...

Custom Carbon prices are pretty reasonable (for real carbon fibre) and I like the way they construct their panels, especially the bonnet and bootlids. They will be doing boot,bonnet and frontbar for my 4 door.

Well my wing is definetely there getting copied at the moment so ring him and just say you want a copy of Ricks GTR wing....group buy would be better I guess.

Let me know how you go.

Jason just got a contract to fix that fj20 drag 200sx completely in carbon fibre so he's probably just busy.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...