Jump to content
SAU Community

Recommended Posts

im just telling him whats real

-instead of hateing he should be particpating.........

who knows what if this motor makes it to 600whp and lives

-i think its posible

look at our honda motors

a b20 is the thinest sleeves and people would crack the sleeves at 7-9lbs of boost......

for years thats what everyone though...

-now after our test we have quit a few of them at over 20-psi with 400+whp(stock block!)

-from this i say since a stock honda block with tiny rods and weak rod bolts can take 100hp per cylinder

why can t a rb25 factory turbo motor take 100whp per cylinder.......

yea you get the off motor that can make more than the average.

I've seen first hand a stock bottom end 26 make 500rwkw, so what?

it didn't last long.

if you actually ho back and read my post and take it in, you'll see/understand why most don't want to push the limits.

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

that s what people say when they ve never been in a big turbo car........

This thread is getting f**king retarded...

You're obviously here to argue and not take on some of the advice/info being provided to you from some very knowledgable people, so why bother starting the thread? Stick to your fully sick Honda's and your 'monster' 400hp and continue to be envious of our Aussie built RB's :(

-from this i say since a stock honda block with tiny rods and weak rod bolts can take 100hp per cylinder

why can t a rb25 factory turbo motor take 100whp per cylinder.......

So we go from stock engine to just stock block or what? Most of the people in here seem to be talking stock engines, as in, unopenned - not stock block.

Compare apples and apples.

You honestly seem to be more set on trolling rather than learning from the wealth of experience on these forums.

yup thats y we re on e85 with a shit load of meth injection lol....

what kind of dyno did u do 480 on? and if ur from australia do u have quarter mile mph to back up the power?

thanks for info

Mainline dyno's and Dyno Dynamics (not in shoot out mode) all ranging from 348-356rwkw (it has been on 4 different dyno's), never been on a hub dyno. I'm from Adelaide, South Australia which hasn't had a drag strip for 8 or so years so no slips to back up power.

my mate with the 25 s14 was tuned by 101 in brisbane so not to sure what dyno but the car was used for drift. i think he ended up spinning a bearing. mind you he rebuilt it back to standard and untill he parted the car it was going strong for over a year.

dont be so abrasive. you sound like a wanker.

been making 430rwhp out of a stock internaled rb25 for over 2 years now.

car is thrashed regularly, and sees drift days, circuit days, hill runs and has done 1 boring ass drag day.

car ran @ 12.9 @ 119mph with full drift setup as drag racing just not worth altering the car for

figure has been made on multiple dyno's including hub and roller.

car makes full boost by 3400...

Read the dyno thread, proof of lots of 250-300kw rb25s with all the details of how they got it

you are using a laggy shit dinosaur turbo, you will never get good results, peak power sure but a crap powerband. Get a decent garret gt28 gt30 style turbo to match your power levels and you will get better results.

Edited by Rolls
dude in post 1 says he is on e85 ash which is why i thought it was relavent

otherwise its 385rwhp on pulp

as it states

we r on e85 with a big jet on meth injection

-for u guys that r too scared of alchol try it u will never turn back!

wow! its 2010 guys by now we should all know

Gasoline is for washing parts, alcohol is for drinking and nitro is for racing!

man up....

You do realise that methanol isn't nitro...

I love when my stereotypical hatred for Americans arrogance is always confirmed whenever I converse with one ;)

yea but we have used nitro and not afraid of it

-unlike all u we have tested it

-if nitro isn t so expensive we would be injection it with methanol.................

now that will jump hp....

yea you get the off motor that can make more than the average.

I've seen first hand a stock bottom end 26 make 500rwkw, so what?

it didn't last long.

if you actually ho back and read my post and take it in, you'll see/understand why most don't want to push the limits.

the thing is that was then

now we have better techonolgy and cheaper race gas(e85)with meth injection.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...