Jump to content
SAU Community

Recommended Posts

Hi!!

I've heard of others having the same situation like mine.

My GT-R32 has been having this flickering Hicas light for quite sometime already. What happens is that it will light up (sometimes w/ matching knocking sound at the Hicas pump area) at high revs and during high electrical load. Checked all the connections, alternator, battery, you name it... all are A ok. Still can't locate the culprit. But I sort of suspect my HKS T.Timer has to do something about it. So last night I disconnect my HKS T.T, and test drive it today and... voila! No more Hicas flickering!

Now for you guys who has this similar problem, how do you deal w/ it? Is it the e-brake or earth connection? I know the BNR32's Hicas system is super sensitive on voltage... What could it be. frown.gif Hope you can help me guys. Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/346105-hks-turbo-timer-hicas-problem/
Share on other sites

Wow, I have the exact same problem, and a HKS turbo timer! But my HICAS light flicker/pump noise/solenoid noise occurs randomly during idle/driving as well. It's annoying when you turn, the steering wheel "kicks" when this happens.

I'll disconnect the bastard tonight.

Wow, I have the exact same problem, and a HKS turbo timer! But my HICAS light flicker/pump noise/solenoid noise occurs randomly during idle/driving as well. It's annoying when you turn, the steering wheel "kicks" when this happens.

I'll disconnect the bastard tonight.

Just as I thought... another one. :thumbsup: Tell me if it solves the problem. My HKS t.t has a harness by the way, that is what I unplugged. I just wish someone can tell us a solution on this besides having to drop the whole Hicas off. I also noticed that this situation happens a lot on GT-R32s and not on any other Nissan that also has Hicas during it's time.

  • 6 months later...

Apologies for the huge delay, I wasn't in the country after my previous post.

I disconnected the HKS turbo time on Sunday(has the wiring harness so just unplugged that), went for a quick drive and the issue didn't appear. Was heaps happy until the next day when I was driving back from work the HICAS "kick" showed it's ugly head again.

Now it doesn't matter whether I connect or disconnect the turbo timer, the HICAS light/kick in steering/noise from boot occurs randomly. I'm thinking perhaps it's the HICAS computer or some sort of electrical problem :( (I haven't done the HICAS diagnosis yet, will do on the weekend).

Also when I start the car I can hear about 4-5 clicks coming from the boot (HICAS pump?).

  • 3 months later...

Got an update on this issue, which popped up yesterday.

Volts got real low (dipped below 12 while engine was running), HICAS system goes spastic (flashing light, can very clearly hear the pump going off every second, steering obviously kicking in sync with the pump). The voltage would go as low as 6.5V while driving (lost radio, and eventually HICAS).

Went and bought a new battery, all sweet for a few minutes until the volts dropped below 12.5V.

Strange thing is, sometimes the volts would go up to the usual 13.5V mark and everything will run sweet.

So, the HICAS system is very sensitive to the voltage (as documented here on SAU), the strange thing is trying to locate source of the voltage drop.

I hope the alternator isn't dying. I've cleaned the plugs at the terminal with contact cleaner it fixed the issue for about a minute. One of the fusible links is a little dodgy, I might try to replace the terminal.

I'll also have a look at the alternator tomorrow and hopefully find some sort of resolution.

*edit*

Unplugging the HKS turbo timer doesn't make a difference. I'll suss out the wiring anyway in case it's not grounded properly.

Check if the alternator belt is slipping, with that voltage drop I'd be looking at the chassis ground and cleaning them up by sanding the paint/rust back, and even go as far as making a seperate (clean) ground for the alternator.

If all that doesn't solve it, new alternator

Well on the way back from work yesterday, alternator stopped charging completely. Managed to get the car off a busy road, and parked it in a side street (flat battery). Today, grabbed a second hand alternator, threw it in the car and away I went.

So far so good, no more flashing HICAS light as of yet. I still hear a solenoid clicking away in the passenger side of the boot. I'll suss it out tomorrow. I'll clean the grounds as well.

  • 2 weeks later...

Sorry for not updating earlier.

In relation to this topic, replacement alternator fixed the HICAS issue (haven't had any steering kicks or the pump going spastic as of yet after a couple of weeks of driving).

As for the rear end issue, it looks like it's related to wheel alignment (toe out I'm guessing, I dropped backe the rear camber arms a bit and it has settled the rear end a bit).

tl;dr - HICAS is voltage sensitive.

  • 7 months later...

I'm bumping this thread because it's relevant.

Since my last post, the 'HICAS' problem came back and I pretty much learned to live with it for almost a year. Yesterday I bought a fat earth cable and replaced the negative terminal. The HICAS problem hasn't occurred since I did the replacement. The radio antenna works now as well (I used to get terrible reception). The clock even works now! :D

If you own an R32, get at least a fat cable going from negative terminal to body. I bought one for $20 from Pep's store with a terminal attached to it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - there is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...