Jump to content
SAU Community

Recommended Posts

Trent do you have any results from SR20's.

I'm buying a TD06-20g 8cm. Hoping i did the right thing =)

I just red all 33 pages of this, Love it =)

Buy the L2 dont get the plain 06 variant.

This car had a GTRS on it (red line) and it lost nothing with the L2, this car has a little more lag than normal as VCT is disabled.

STD SR20 with 264 HKS cams on std valve springs etc..

post-34927-0-65490100-1313720508_thumb.jpg

Yeah I nearly bought the one (HKS mani) in for sale the other day cause I have an old HKS gate to suit, probably should of but i dont have alot of faith in second hand cast parts I cant see before I buy :(

now I will have to weld it onto the housing ghetto style too, doubt i can afford the 6boost low mount atm..howmushizzit??

Actually if i sell my old turbo..hmm

around $1200 + delivery lol :O

cheers for the graph Trent, i rekon one of those will be perfectly suited to a RB25.

You wouldn't happen to have a dyno graph of a RB25 with one of these turbos by any chance??

Buy the L2 dont get the plain 06 variant.

This car had a GTRS on it (red line) and it lost nothing with the L2, this car has a little more lag than normal as VCT is disabled.

STD SR20 with 264 HKS cams on std valve springs etc..

That is awesome considering it's compared with a HKS item.

How much boost?

That is awesome considering it's compared with a HKS item.

How much boost?

19peak, the gate was a little lazy (ebay) so its missing about 20 mid range kw too... as it cracked open @ 15psi.

Thats insane!

How do you think it would go on an 8cm housing or you think thats a dud choice? There are also 8cm IW housings that Kando sell.... Man these things just got back on the map for me!

Thanks Trent, sorry for so many Qs.

P.S. Told you ARTZ!

Thats insane!

How do you think it would go on an 8cm housing or you think thats a dud choice? There are also 8cm IW housings that Kando sell.... Man these things just got back on the map for me!

Thanks Trent, sorry for so many Qs.

P.S. Told you ARTZ!

10cm only for rb25 reckon. 8cm will miss out on too much mid torque and kw. If you got it run with it but if it was mine id use the 10cm.. ive had a few IW gates not perform so until i can confirm it being the turbo or the car i will stick to the ex gate.

Buy the L2 dont get the plain 06 variant.

This car had a GTRS on it (red line) and it lost nothing with the L2, this car has a little more lag than normal as VCT is disabled.

STD SR20 with 264 HKS cams on std valve springs etc..

Holly shit thats good.

Thanks Trent =)

This must be on e85 tho yea?

Holly shit thats good.

Thanks Trent =)

This must be on e85 tho yea?

conservative BP98 tune, peak timing was only 9 odd degrees took 12 no dramas..

but being std i was worried about longevity as it gets the shite drifted out of it.

conservative BP98 tune, peak timing was only 9 odd degrees took 12 no dramas..

but being std i was worried about longevity as it gets the shite drifted out of it.

Please comment on this vs a 8cm :(

FOR AN SR.... lol... will the 8cm make it much more responsive or is the extra flow of the 10cm only going to make it better better better?

here some pics of it compared to stock turbo..

inlet is 3 inch but comp wheel is the same diametre as stock just with bigger housing

DSC03038.jpg

but baby got back :P

DSC03035.jpg

I'm really not too keen on welding gate onto the housing but many do it and say it works fine..

What the biggest comp cover that fits with the standard RB 25 exhaust mani(with a little spacer) is it 3 inch?

and what would the TDO6H-20g with 12cm housing IW housing be like?

anyone have a rough idea with spool difference form 10cm to 12cm- 300-400ish rpm?

cheers

darren

Edited by jet_r31

I'm ready to buy now , What do you guys think of this one, with the SL2 rear wheel, haven't seen this one up there before.

I want a turbo that can do 320- 340rwkw(in a manual) i don't need anymore than that as i will be trans limited, so if i can

knock of a bit of top end flow and pick up spool, then all the better

http://www.ebay.com....984.m1438.l2649

What would a TD06SL2-20 G 10cm external gate do maxed out on a RB25?

you have any idea STATUS?..anyone?

cheers

darren

Edited by jet_r31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...